GT4 Zed Posted February 14, 2012 Posted February 14, 2012 (edited) Some OEM stuff for those who prefer it that way or replacing damaged items or a project:teeth: I need them gone from my garage ASAP. OEM complete wiper assembly with wiper arm and Bosch aero wiper £35 del. OEM complete Struts, springs and cones in good condition. ~25K miles covered only. Kept them as insurance. Need to go as gathering dust. £175. OEM rear camber arms £25 del OEM Revup lower plenum to replace your damaged one or for a project, £60 delivered Edited October 21, 2012 by GT4 Zed Quote
speedwell Posted February 14, 2012 Posted February 14, 2012 Any way of confirming whether ARB's are definitely thicker than earlier ones?...what diameter are they? Quote
rothers2901 Posted February 14, 2012 Posted February 14, 2012 Hi mate i will take the OEM droplinks ?rear £20 delivered Thanks Rothers. PM sent. Quote
Keyser Posted February 14, 2012 Posted February 14, 2012 Hi OEM intake manifold is that from a DE? and pickup from where? Quote
GT4 Zed Posted February 14, 2012 Author Posted February 14, 2012 Hi OEM intake manifold is that from a DE? and pickup from where? Chris, it's a revup manifold not DE. Will fit with no issues. The difference is the runners are shorter which than the DE's which accounts for why the revup made more power and slightly less torque than the DE but at a higher rev max. Longer runners better for torque. ?Could reverse be reproducible on the DE with raised revs and remap???. Its possible and I have not come across any data or facts to support or prove the contrary. Might work well with the SC which is different from NA who knows Quote
GT4 Zed Posted February 14, 2012 Author Posted February 14, 2012 Any way of confirming whether ARB's are definitely thicker than earlier ones?...what diameter are they? The diameters are the same as within all uk cars(34mm/21mm) but bigger wrt JDM cars(32mm/20mm). The increase stiffness was achieved by increase wall thickness as they are hollow tubes. This OEM upgrade should be very worthwhile for JDM cars as these have smaller ARB's diameter for comfort. Most aftermarket upgrades are 34-36mm/20mm but have adjustability to further increase stiffness if required. Look up 350z wiki for this tech Quote
Mack Posted February 15, 2012 Posted February 15, 2012 I'm very interested in the cats, will they fit a 04 UK 350z? Thanks EDIT: Payment now sent, check your PM's! Quote
Asad Posted March 14, 2012 Posted March 14, 2012 il take the bonnet if it has less stone chip marks then mine. my cars 2004 kuro black. where about on the bonnet are the scuff marks? Quote
GT4 Zed Posted March 16, 2012 Author Posted March 16, 2012 Upper plenum SOLD @Asad, there are very 2 or so chips on the bonnet but a few scuffs and scratches from poor storage but these are not deep through the lacquer and should buff out easily. The bonnet has been of tthe car for sometime and moreso it 1 year younger than yours You Can come up to worcester to see it for yourself before you part with your hard-earned £ or take my word for it and arrange pick up. If i have time on the weekend after doing my own bits i will give it a buff with t cut and see what she turns up like. Quote
GT4 Zed Posted March 26, 2012 Author Posted March 26, 2012 Bonnet SOLD Bump for few items left! Quote
GT4 Zed Posted April 8, 2012 Author Posted April 8, 2012 Spare wheel sold Interest on side skirts. Pm replied Quote
GT4 Zed Posted August 27, 2012 Author Posted August 27, 2012 Any takers? Offers? Need these gone Quote
GT4 Zed Posted October 3, 2012 Author Posted October 3, 2012 TTT Further reduced. need to get these out of the garage Offers accepted Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.