andlid Posted October 30, 2011 Posted October 30, 2011 I can't figure out where this part goes on my engine, the photo gives little away on where it might be. I could prolly thrawl through 100 pages manual to find it but wondering if someone has the answer to hand? got a different plenum on and just can't make out where this is... Quote
andlid Posted October 30, 2011 Author Posted October 30, 2011 http://image.modified.com/f/18991587/mo ... ne_bay.jpg found it, left side behind the left timing cover... Quote
Jez @ H-Dev Posted October 30, 2011 Posted October 30, 2011 Its the cam cover breather pipe I think. Quote
Keyser Posted October 30, 2011 Posted October 30, 2011 That picture is off the front left hand corner of the plenum as you look at it - the pipe connects to the lower plenum - can fid out where the other end goes if you like but I think it goes to the vacum line that runs with the petrol feed pipe - would need to double check that last bit to be sure. Hope that helps. Quote
andlid Posted October 30, 2011 Author Posted October 30, 2011 cheers guys, to make it harder to see the pipes now go into my catch can from ARC... not sure how that will tie into things either Quote
andlid Posted October 30, 2011 Author Posted October 30, 2011 thats my setup... think it's the left blue pipe... Quote
andlid Posted October 30, 2011 Author Posted October 30, 2011 ok the donkey doing this install had at least 1 litre of vodka before he installed it, it's arseways and needs fixing... Quote
Ian Posted October 31, 2011 Posted October 31, 2011 ^^ My setup Left hand pipes - One goes to the rear of engine (There is a hose there that goes under the TB to the intake pipe), the other goes to the plenum & once you remove that hose then you block the other side off. Right hand pipe - Goes into the free connection under the intake pipe Quote
Keyser Posted October 31, 2011 Posted October 31, 2011 Ian - please don't post porn this early on a Monday morning!!!! Cosworth Plenum Mmmmmmmmmmm Quote
andlid Posted October 31, 2011 Author Posted October 31, 2011 omg, wtf in the fck name has he been at ? Quote
andlid Posted October 31, 2011 Author Posted October 31, 2011 Omg just done a schematic of my current setup (below) ^ that's obviously arseways, thank you for installing it that way... This is the way it should be: So just hoping that mr nogood has kept my spares in the bag so I can yet again rectify another thing not right... (thanks Ian for the pointers) What is the actual impact on this? Quote
Keyser Posted October 31, 2011 Posted October 31, 2011 Is the engine still in the front and the gearbox behind it on your Zed??? Just checking mate Quote
andlid Posted October 31, 2011 Author Posted October 31, 2011 Is the engine still in the front and the gearbox behind it on your Zed??? Just checking mate Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.