Jump to content

LED Rear Lights


california987

Recommended Posts

Mine were plug and play, no modification required, but I read that some of the Japanese LEDs required some chopping and changing to fit properly. I'm sure there have been similar threads before if you do a search. I presume you have a UK 350z and not an import?

Link to comment
Share on other sites

Thanks for all the help guys :thumbs: just finished fitting them. Will stick a pick up in a min. Are the original lights worth anything if I sell them?

 

Nice work ..

 

The original lights aren't worth much really ... you'll probably get £40 for the pair if you're lucky ...

 

Most people tend to keep their original lights to swap back before selling the Zed ...

 

Now get some pics up .. LoL

 

:thumbs:

Link to comment
Share on other sites

Thanks for all the help guys :thumbs: just finished fitting them. Will stick a pick up in a min. Are the original lights worth anything if I sell them?

 

Well done mate :yahoo:

 

I would keep them and if you ever sell the car you put the originals back and sell the LED's :thumbs:

Link to comment
Share on other sites

Took a pic when I fitted one side to see the difference, it was only until I uploaded it here I realised the picture was pretty poor. After I received the lights I realised they were not the proper 06+ LEDs :( but I fitted them anyway and pleased with the result. The lights shine a true red as well rather than the pink which I have seen on other copies of the 06 LEDs.

Link to comment
Share on other sites

  • 3 months later...

I changed my rears for the LED style clusters a few weeks back and had the same issue.

 

There is a thread somewhere with a guide/pictures etc .. but it's simply a case of shaving off the three plastic edges on the connector to allow it to fit ..

 

I used a sharp stanley knife and took off a bit at a time ... Very easy to do!

 

:thumbs:

Link to comment
Share on other sites

I changed my rears for the LED style clusters a few weeks back and had the same issue.

 

There is a thread somewhere with a guide/pictures etc .. but it's simply a case of shaving off the three plastic edges on the connector to allow it to fit ..

 

I used a sharp stanley knife and took off a bit at a time ... Very easy to do!

 

:thumbs:

 

Thanks :) :)

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...