Cleared Foglight

[KyleR]

I'm going to give this a little bump as i'd be interested to know the same as Dicky.

[sparky370z]

when you "bake" the light its loosens up all of the glue. this means u have to pull apart the light cluster. there will be glue residue everywhere.

 

once you have separated the lens and the back, there is a red lens that has to be removed. this is a pain really.

 

then you should have a clear lens unit.

 

once back on the car install a LED red lamp that i got from Ebay. you can usually only buy them in pairs.

 

http://www.ebay.co.uk/itm/2X-Red-T10-19 ... 43ae09cb51

 

think these are the ones. i have had no problems with mine at all and did this mod about 2 years ago.

[richt]

Haven’t noticed this little project before, which looks great by the way. What do you do once the unit is opened? Is there a red internal reflector you have to remove, then replace it with a red led ? and how do you reseal the unit again once finished??

Sorry to be a pain but Id like to have a go at this one.

 

Once you've pulled out the red reflector the glue should still be sticky, simply push it all back together.

I then ran some clear silicone round it all just to be sure.

 

Get it done, it looks so much better.

[Dicky]

Thanks for the info all

[spursmaddave]

Or do it properly and buy some crystal clear ones of US eBay for about £90

 

If a job is worth doing......