TT Convert Posted July 14, 2008 Posted July 14, 2008 Firstly I tried the cables off my Audi TT for obvious reasons they didnt work. Bought the correct protocoll cable off fleabay, tried that this morning and hey presto, that wont work. Got the program digimoto (recomended by members). Software works fine, it finds the interface box but says its having no response from my car Anybody have any ideas or had simler problems?? Quote
Ian Posted July 14, 2008 Posted July 14, 2008 Silly question but you do have the ignition on don't you? Quote
TT Convert Posted July 14, 2008 Author Posted July 14, 2008 tried both , on and off, also engine started :wacko: Quote
TT Convert Posted July 14, 2008 Author Posted July 14, 2008 yeah, didnt show anything on the screnn as the car wouldnt respond, it says 'no protocall' Quote
Chris`I Posted July 15, 2008 Posted July 15, 2008 Should work if you have the ignition on. I have a generic ELM327 in mine. What status lights does it have on the unit itself? I take it windows has the driver installed and it recognises it? Quote
bronzee Posted July 15, 2008 Posted July 15, 2008 TT convert, contact BlaZt (Jason specifically), say Bronzee suggested you contact them. They have a very clever consult cable for a 350z. The website isn't the prettiest, but they know what they are doing. http://www.blazt.biz Quote
mec Posted July 15, 2008 Posted July 15, 2008 Have you got the port and baud rate setup right for the program? Quote
TT Convert Posted July 15, 2008 Author Posted July 15, 2008 TT convert, contact BlaZt (Jason specifically), say Bronzee suggested you contact them. They have a very clever consult cable for a 350z. The website isn't the prettiest, but they know what they are doing. http://www.blazt.biz thanks will do. ok I have had my pleniumnemium spacer fitted today, the garage also couldnt hook up to my car . any one else had this problem? Quote
andlid Posted October 14, 2008 Posted October 14, 2008 TT convert, contact BlaZt (Jason specifically), say Bronzee suggested you contact them. They have a very clever consult cable for a 350z. The website isn't the prettiest, but they know what they are doing. http://www.blazt.biz thanks will do. ok I have had my pleniumnemium spacer fitted today, the garage also couldnt hook up to my car . any one else had this problem? Tried Bimoto with an ELM327 yesterday. Strange things happened. Got connected for about 5 seconds then it reset (disconnected) I could sit and redo that for as long as I want still the same result. In Windows it shows as a serial usb converter and the COM port is 8 so the program can find it and actually goes out and does a bit of RX/FX on the lights but it's like it founds out it does not like it... Mine is a JDM and wondering if that might be causing me some issues? Anyone else experience this? Quote
M13KYF Posted October 14, 2008 Posted October 14, 2008 Have you got the port and baud rate setup right for the program? +1 I remember this being a issue with someone else Quote
Chris`I Posted October 14, 2008 Posted October 14, 2008 In Device Manager, go find it. Disable the buffer. Thats usually the cause for these and USB GPS pucks. Or try fiddling with the baud rate, but it usually does nothing. Quote
andlid Posted October 14, 2008 Posted October 14, 2008 In Device Manager, go find it. Disable the buffer. Thats usually the cause for these and USB GPS pucks. Or try fiddling with the baud rate, but it usually does nothing. Mmmm the buffer... sound plan Quote
andlid Posted October 14, 2008 Posted October 14, 2008 what baud rates are ye all using on the ELM327? Quote
Chris`I Posted October 14, 2008 Posted October 14, 2008 what baud rates are ye all using on the ELM327? Will let you know when I get home, its raining so dont want to goto the car and get wet Quote
M13KYF Posted October 14, 2008 Posted October 14, 2008 what baud rates are ye all using on the ELM327? Will let you know when I get home, its raining so dont want to goto the car and get wet wimp Quote
Chris`I Posted October 14, 2008 Posted October 14, 2008 what baud rates are ye all using on the ELM327? Will let you know when I get home, its raining so dont want to goto the car and get wet wimp I'll be home by 5pm, plently of time to put it right Quote
Pingu2 Posted October 14, 2008 Posted October 14, 2008 I use 38400 baud rate on my elm.. (its bluetooth not usb mind you).. Quote
andlid Posted October 16, 2008 Posted October 16, 2008 what baud rates are ye all using on the ELM327? Will let you know when I get home, its raining so dont want to goto the car and get wet Still raining? j/k Had a go on the Altezza I got and got the same response it takes a few RX/TX and then BANG (the dust is gone...) lost connection. Exact box name: ELM327 Ver1.2a Comes up in Device manager as (see attached pics on settings), cant see the buffer value as discussed here (only available for normal serial cables I think...) does anyoen have the driver details you use? Quote
andlid Posted October 16, 2008 Posted October 16, 2008 I use 38400 baud rate on my elm.. (its bluetooth not usb mind you).. Cool, where did you get that one? (might order a new one if I cannot get this one working) Quote
Chris`I Posted October 16, 2008 Posted October 16, 2008 Sorry did go look, but its been metal busy at work and forgot to post it when I got home! Baud is set to 9600. From your settings this is starting to ring bell. I think it is the drivers that are the issue as I had this before and a new driver fixed it. Drop me your email address in a PM and I'll send my driver to you and see if that fixes it. Oh and keep posting on here to remind me, I'm loosing my memory Quote
andlid Posted October 16, 2008 Posted October 16, 2008 Sorry did go look, but its been metal busy at work and forgot to post it when I got home! Baud is set to 9600. From your settings this is starting to ring bell. I think it is the drivers that are the issue as I had this before and a new driver fixed it. Drop me your email address in a PM and I'll send my driver to you and see if that fixes it. Oh and keep posting on here to remind me, I'm loosing my memory PM sent Quote
Chris`I Posted October 16, 2008 Posted October 16, 2008 Sorry did go look, but its been metal busy at work and forgot to post it when I got home! Baud is set to 9600. From your settings this is starting to ring bell. I think it is the drivers that are the issue as I had this before and a new driver fixed it. Drop me your email address in a PM and I'll send my driver to you and see if that fixes it. Oh and keep posting on here to remind me, I'm loosing my memory PM sent Recieved. Will send them tonight when I remember Quote
andlid Posted October 16, 2008 Posted October 16, 2008 Sorry did go look, but its been metal busy at work and forgot to post it when I got home! Baud is set to 9600. From your settings this is starting to ring bell. I think it is the drivers that are the issue as I had this before and a new driver fixed it. Drop me your email address in a PM and I'll send my driver to you and see if that fixes it. Oh and keep posting on here to remind me, I'm loosing my memory PM sent Recieved. Will send them tonight when I remember deadly... (I'll remind you don't worry...) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.