lmc Posted July 2, 2017 Share Posted July 2, 2017 (edited) The time has come to accept the inevitable and break the 350z for parts. There are a lot of sought after parts which I will list below some of which are still in there packaging and have never been used. Any part which is listed below has done less than 2k miles as that’s all I’ve managed to accumulate in the 4.5 years I’ve owned the car. All parts are exclusive of postage although postage can be arranged for most things. Bank transfer preferable although PayPal is fine if costs are covered All other standard parts are available so just ask if you want something Will start with these wheels and add more parts when i get back from walking the dogs. Work T7R2P WHEELS Reluctant sale still in there box only opened to check there ok. Comes with centre caps and valves and a set of blue works open ended wheel nuts M12 x P1.25 Fronts are 19 x10 et 17 A Disk Rears are 19 x 11 et -42 A Disk Price is £2000 collected. Can post but at your cost and will be fully insured. photobucket.com New still in box Torqen under tray £150 Tarmac sportz frp roof spoiler £85 Tarmac Sportz g35 spats £85 Tarmac sportz frp side diffusers £140 Driftworks front camber arms £175.00 Stanceparts full (front & rear) air cup kit £ 850 Edited July 2, 2017 by lmc Link to comment Share on other sites More sharing options...
valy Posted July 2, 2017 Share Posted July 2, 2017 sad to hear this Lee,was hoping to see your car finished not took apart but I suspect you have a good reason,anyway good luck with it Link to comment Share on other sites More sharing options...
lmc Posted July 2, 2017 Author Share Posted July 2, 2017 More parts listed. More to come Link to comment Share on other sites More sharing options...
lmc Posted July 2, 2017 Author Share Posted July 2, 2017 Vertini drift wheels in good condition with a couple of tiny marks small amount of life left in the tyres but for purposes of sale assume they are dead Wheel Size 19 x 9 &10.5 Offset (front & rear) Front ET 20 & Rear ET 25 £800 collected Link to comment Share on other sites More sharing options...
lmc Posted July 2, 2017 Author Share Posted July 2, 2017 (edited) Takeda Induction kit been used for less than 200 miles on the car £250 Carbon engine cover £75 Carbon slam panel £75 Edited July 2, 2017 by lmc Link to comment Share on other sites More sharing options...
lmc Posted July 2, 2017 Author Share Posted July 2, 2017 New lights £300 ordered from Australia as i was assured they were for rhd. been fitted to the car but not wired yet. will include a pair of 8 pin tails as there 6 pin plugs you will need to adapt them. 1 Link to comment Share on other sites More sharing options...
lmc Posted July 2, 2017 Author Share Posted July 2, 2017 Seibon (02-08) carbon fibre vt style bonnet. £850 collection only trial fitted to the car only. Link to comment Share on other sites More sharing options...
lmc Posted July 2, 2017 Author Share Posted July 2, 2017 1 hour ago, valy said: sad to hear this Lee,was hoping to see your car finished not took apart but I suspect you have a good reason,anyway good luck with it Its just got to the point where I'm not willing to spend anymore money on it and unfortunately not being in a finished state the only way to recoup as much money as possible from it is to break it Link to comment Share on other sites More sharing options...
lmc Posted July 3, 2017 Author Share Posted July 3, 2017 Just for info as I've had a lot of messages I won't be breaking the smaller parts until some of the more expensive parts have sold. Link to comment Share on other sites More sharing options...
lmc Posted July 3, 2017 Author Share Posted July 3, 2017 More info on the air cup kit can be found here https://www.stanceparts.com/air-cup-lift-system/ Link to comment Share on other sites More sharing options...
Erni902 Posted July 3, 2017 Share Posted July 3, 2017 Can I get 1st dibs on the headlights please? Can you wait until Thursday for confirmation? Link to comment Share on other sites More sharing options...
LDUNKZ18 Posted July 4, 2017 Share Posted July 4, 2017 dibs on the tarmac roof spoiler. will pm you Link to comment Share on other sites More sharing options...
MDMetal Posted July 4, 2017 Share Posted July 4, 2017 How much would you want for the rear boot trim (the piece with the rear light in) assuming all it's clips are unbroken? Link to comment Share on other sites More sharing options...
lmc Posted July 4, 2017 Author Share Posted July 4, 2017 Not much interest in the aftermarket parts which surprises me. Any particular reason why? Link to comment Share on other sites More sharing options...
cob1980 Posted July 4, 2017 Share Posted July 4, 2017 20 minutes ago, lmc said: Not much interest in the aftermarket parts which surprises me. Any particular reason why? Might be less people looking in this section than '350z parts for sale'? How much postage on the carbon slam panel? Any marks on it? Cheers. Link to comment Share on other sites More sharing options...
JoshTSquared Posted July 4, 2017 Share Posted July 4, 2017 Those work wheels wish I had 2k lay about, that's exactly how I would have them 1 Link to comment Share on other sites More sharing options...
lmc Posted July 4, 2017 Author Share Posted July 4, 2017 53 minutes ago, JoshTSquared said: Those work wheels wish I had 2k lay about, that's exactly how I would have them Tbh there not going to work with a standard car it needs to be a wide arched car. Link to comment Share on other sites More sharing options...
lmc Posted July 4, 2017 Author Share Posted July 4, 2017 (edited) 1 hour ago, cob1980 said: Might be less people looking in this section than '350z parts for sale'? How much postage on the carbon slam panel? Any marks on it? Cheers. Your in a long que for this but if none of the larger items sale then i may have to rethink my plans. Edited July 4, 2017 by lmc 1 Link to comment Share on other sites More sharing options...
m1ke13 Posted July 4, 2017 Share Posted July 4, 2017 Don't suppose you have any HFCs ?? Link to comment Share on other sites More sharing options...
lmc Posted July 4, 2017 Author Share Posted July 4, 2017 39 minutes ago, m1ke13 said: Don't suppose you have any HFCs ?? No sorry Link to comment Share on other sites More sharing options...
m1ke13 Posted July 4, 2017 Share Posted July 4, 2017 Just now, lmc said: No sorry No worries, thanks for the reply Link to comment Share on other sites More sharing options...
pjf1985 Posted July 5, 2017 Share Posted July 5, 2017 Hey so I take it the air cup kit requires coilovers to be fitted? Looks like an awesome bit of kit! Link to comment Share on other sites More sharing options...
lmc Posted July 5, 2017 Author Share Posted July 5, 2017 Yes would require true coilovers to be fitted cheers lee Link to comment Share on other sites More sharing options...
JoshTSquared Posted July 5, 2017 Share Posted July 5, 2017 On 2017-7-4 at 20:35, lmc said: Tbh there not going to work with a standard car it needs to be a wide arched car. I figure not with that offset in the rear. They'll look awesome fitted to a nice z though. Glws man Link to comment Share on other sites More sharing options...
lmc Posted July 8, 2017 Author Share Posted July 8, 2017 With the surprising lack of interest im going to have to put this on hold whilst i review my options. apologies to the few people that have showed an interest in parts but im sure you can appreciate its not sensible to break on the basis of selling £300 worth of parts. Link to comment Share on other sites More sharing options...
Recommended Posts