Jump to content

Anyone using the Sony XAV-AX100 Head Unit?


ZedAndy

Recommended Posts

Hi All,

 

Apologies if this has been asked before, I tried doing a search but nothing came up-

 

Recently ordered this and will receive it later in the week - but I've just been reading about potential steering wheel control incompatibility issues. Does anyone happen to have this head unit in their zed? (https://www.caraudio...100_p-40099.htm)

 

Also, does anyone have experience with the Connects2 CTKNS08? (https://www.caraudio...s08_p-35986.htm)

 

Cheers!

Edited by ZedAndy
Link to comment
Share on other sites

I ended up sending mine back in favour of the kenwood DMX-7017DAB as it has a few more features, so I can't be of any help, but I still think the sony xav looks the best (the ui doesn't look like it was designed 20 years ago unlike all the other HUs, plus the screen is far more crisp and bright), @spike4real I think you'll definitely enjoy it. Good luck guys

Edited by ZedAndy
Link to comment
Share on other sites

Absolutely loving it! Good luck with your install. Screw the stock mounting brackets on the side of the headunit, don't waste time looking at the plastic parts that come with the kit, they are not needed. Attach the kits front fascia onto the headunit before putting the centre console back together, the gear surround will push it all together at the end.

Link to comment
Share on other sites

I tested the steering controls earlier...volume up and down works fine but only one of the next\prev track buttons work, can't remember which one.

 

Update - previous track button works, next track button doesn't.

Edited by spike4real
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Returning to this thread to offer a warning: don't buy the Connects2 CTKNS08. It's stated to work with a 350z on both caraudiocentre (www.caraudiocentre.co.uk/product_m-connects2-ctkns08_p-35986.htm) and their own website, but the connections aren't even remotely the same!

 

The only real way of doing this is not to be lazy like I was and to do the method described here: http://www.350z-uk.c...links-to-parts/ as well as busters guide for the low volume fix: http://www.350z-uk.c...lume-fix-guide/ (but here you will find that the connection he says you have to buy is incorrect, the one you actually need is http://www.halfords....harness-adaptor

 

After a month of returning cables and faffing around I finally have mine installed (kenwood dmx7017dabs)

DuD0YS8.jpg

Edited by ZedAndy
  • Like 1
Link to comment
Share on other sites

  • 7 months later...

Reviving the thread as I've just bought and fitted the Sony XAV-AX100 into my 2005 Zed and I have a question about the fitment and facia.

 

Perhaps I have it misaligned but there seems to be more space at the bottom than at the top.

The facia that came with the head unit doesn't fit (due to the spacing issue) and the 350Z Double DIN facia adapter that I bought just in case won't allow the head unit through (seems to be a little small).

 

I'll try and post some images tomorrow but wondered if anyone who has fitted one could offer some advice. Did anyone run into similar issues?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...