zippypooz Posted January 12, 2017 Posted January 12, 2017 I possibly may need to get my rear arches rolled as im fitting spacers shortly, does anyone know any local firms in the west sussex area...or nearby that roll arches?!! Cheers all! Quote
Jetpilot Posted January 12, 2017 Posted January 12, 2017 If you speak to Buster nicely he may fit you in. although he is in Ferndown. 1 Quote
Tinyflier Posted January 12, 2017 Posted January 12, 2017 (edited) I used The Arch Enemy in Abinger Hammer between Dorking and Guildford. They guy operates out of Drift Street Imports (I think) in a small trading estate that seemed to be totally devoted to race car/fabrication businesses. Think I contacted them through their WebSite. Did a great job - thoroughly cleaned inner lips, rolled then sealed them. David Edited January 12, 2017 by Tinyflier 1 Quote
Toon Chris Posted January 12, 2017 Posted January 12, 2017 Are you fitting massive spacers? Appreciate you might want the rolled look and that's fine, but unless you go <<<wide>>> you can spacer out quite a bit with no changes. Quote
zippypooz Posted January 12, 2017 Author Posted January 12, 2017 Are you fitting massive spacers? Appreciate you might want the rolled look and that's fine, but unless you go <<<wide>>> you can spacer out quite a bit with no changes. No, im fitting 15's but its lowered and theres not much space! Quote
zippypooz Posted January 12, 2017 Author Posted January 12, 2017 I used The Arch Enemy in Abinger Hammer between Dorking and Guildford. They guy operates out of Drift Street Imports (I think) in a small trading estate that seemed to be totally devoted to race car/fabrication businesses. Think I contacted them through their WebSite. Did a great job - thoroughly cleaned inner lips, rolled then sealed them. David Ahhh nice! Thank you. Quote
Payco Posted January 12, 2017 Posted January 12, 2017 Try contacting PTS in Worthing, not far from you. They will do a good job for you. 1 Quote
zippypooz Posted January 12, 2017 Author Posted January 12, 2017 Thanks P. Yup i did, can do it for me. 1 Quote
350zedd Posted January 12, 2017 Posted January 12, 2017 Buy a roller for 30 quid and do it yourself...easy enough to do 1 Quote
zippypooz Posted January 13, 2017 Author Posted January 13, 2017 Hahaha id rather get a pro to do it...then if they mess it up i can blame them!! 1 Quote
Mopedmark Posted January 13, 2017 Posted January 13, 2017 Buy a roller for 30 quid and do it yourself...easy enough to do Yep easy enough to do if you take your time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.