GIXXERUK

DS200 wasn't a bad guess for an idiot and copper grease

and thread lock ? None of the original threads had threadlock on them when I dismantled it all. The six nuts and bolts for the flange actually have spring washers on them which negate the necessity for threadlock. It won't do any harm to use it if you want but Nissan never used it in the first place and it all stayed together okay. You could use it for peace of mind though. Nissan aren't really a good guide

DS2500 or performance friction

and thread lock ?

seems very cheap, sounds as though they have just greased them afaik the new parts are revised and the clicking should not return if they are fitted, ask nissan what they supplied to vic young

http://www.350z-uk.com/forum/viewtopic.php?t=15471

you lazy so and so http://www.350z-uk.com/forum/viewtopic ... highlight=

on the chain shots has the hue been played with ? as the wheels look slightly blue in those

you can replace your sidelight bulbs with led's and put chrome indicator bulbs in the front and rear to lose the orange look

lookin very stew headlights - condensation ?

Just a load of bolts, straight forward though

+1

there has never been any long term feedback on this but no one has suffered any problems apart from the noise

backwards or forwards and sometime can happen when changing gear, basically when you load the rear axle with drive

afaik you are correct, i prefer the older type that go into the dash

Forget it and move on, not easy i know but its for the best... trust me

breakers ? isnt someone breaking a car on here or ebay dunno if the roadster bmc is the same as the coupe ? http://www.350z-uk.com/forum/viewtopic.php?t=15871 http://cgi.ebay.co.uk/nissan-350z-parts ... 286.c0.m14

Ditto! +1 At best i have lost 4-5k in 12 months

superb bike the k4 600

seen that, what do you think the idiots are thinking when designing that They are thinking kerrrrr ching - take it to the dealer for a bulb change

+1 how the hell are you supposed to do this at the side of the road

+1 i did jack the car up a little but didnt remove the wheels, jacking up gives extra clearance you lose a bit of knuckle skin though

mine had this on the front tyres, had the tracking done and all has been ok since

I did mine by going through the inner wheel arch

congrats and