MickJ
-
Posts
190 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by MickJ
-
-
When I had my M3 there were lots of discussions on the M3 Forum as to whether or not you should run it on Optimax as it was then, or standard supermarket, some swore they could tell the difference but to be honest i couldn't tell any difference at all and run it on the latter, although I have only used 'super' unleaded in the Zed up to now.
-
Well done, enjoy!
-
Thanks for the replies and links, would seem that Halfords would be the path to go down, as someone said it looks good on the darker cars has anyone done it on a Ultra Yellow Zed and wish they hadn't, which leads me on to ask how easy is it to remove should you wish to?
Cheers Mick
This time tomorrow it will be all mine, mine I tell you.......
-
Been looking at some on Ebay, come from the States anyone used them\got them on or can they recommend another supplier preferably in this country or do they look naff and best left standard, thoughts, opinions most welcome.
Cheers Mick
-
I like that!
-
As title, RR Ansty 3:30 pm (ish) anyone from on here?
-
Just saw this on ebay http://cgi.ebay.co.uk/2005-05-Nissan-35 ... dZViewItem
Hands off! thats mine now, well will be on Friday afternoon, will let you have details later.
-
Price
SOUND PADS 1 £6.95
O/S DOOR 1 £320.00
O/S DOOR FOIL 1 £8.84
O/S SCRAPER MOULDING 1 £122.00
From a quote I saw recently, don't include labour or painting but is somewhat a lot cheaper than what you have been quoted and they are gen Nissan parts!
-
many thanks to you both for your replies, sounds like the peg is in position at build.
Cheers Mick
-
Retaining peg that is situated under the drivers seat and stops the drivers overmat sliding around, can anyone tell me is that already fitted when built or does it come with the overmats? if the latter how is it fitted?
Cheers Mick
-
.. do you get that 'rattle' when you turn the engine off too ??
yes on my current car.
-
Mine is the same, as is the one I test drove and bought this afternoon.
-
I bought a Pipercross sports filter to fit into my GT, which arrived today, but today I bought a GT4, with it's slight increase in power over the GT would it still be worth me fitting this filter or could it cause any harm, any advice would be appreciated.
TIA
Mick
-
Sounds like a good deal mate! Was it the car from Camden Northampton? If so, I had a look at it a few weeks ago when I popped in for some brochures and it looked
. I'm surprised at the deal because I've heard nothing but bad news regarding this dealer but I hope it works out for you! At least if you have any warranty troubles I guess you'll be dealing with the garage in Spon End, which is supposed to be OK according to my dad who got his NOTE from there.
Yes it was Camden's, I found them very easy to deal with and very friendly and as you quite rightly say it would be Spon End dealership for any warranty problems, who have been ok up to now not brilliant but ok!
-
May have seen my link about a GT4 (#3) I was watching, have bought it and pick it up next Friday
, didn't get a great deal off it, 2 new rear tyres, about £500 off and a tank of petrol but to be honest they gave me a good trade in on mine £20500 which I thought was very good considering my local dealer offered me £18K against a new one. The plate on it is apparently worth a £1K.Is it my imagination but is the ride slightly softer and the exhaust a little bit quieter than the std GT or maybe it was because I was only tootling along
Cheers Mick
-
Going to have a look at it tomorrow, already offered me a 'ballpark' £20k over the phone for mine and says there could be some movement their end, told them I want tax and more warranty but we will see, quite pleased to see that there is no change in the insurance.... btw keep yer 'ands off it I want it
-
-I would put a bet that car belonged to NMGB
3rd GT4 out of 176... ( adds a bit of value? maybe?)
-Camden I think is the company that deals with all the ex-company cars from Nissan...
-Maybe the demonstrator, press car... (maybe ragged, but probably highly maintained... hence the expectation on the price)
Go on ... someone call them and ask who the previous owner was....?
just spoken to them, no it's a privately owned car and has a good registration on it.
-
Try him he's breaking a 350Z might be worth a call, Ebay item #: 230127442792
-
Only managed to find one advertiser for Nismo panel filter on Ebay and he was in Japan and wanted £59 ish found these though item number: 220053716884
for the cost i'm going to give it a try.
-
On Ebay : 260102599079
was looking to maybe px-ing mine against it, but I think they need to come down a bit, any thoughts?
-
Just an update, just had the screen replaced by Autoglass, had to go to their local depot due to weather, can only say how professional they were and a good job done, I asked what it would have cost me had I been paying, £374.67 all in, fitted and took about 70 minutes to do.
-
Had a similar thing happen on Tuesday on the M25 between J17\18, one of those traffic officers did a rolling roadblock and then brought us to a halt as a Fiat Tipo had broken down in the outside lane, car in front of me did nothing more than pull across to the hard shoulder and then speed off down that, I don't know if they got his number....
-
FRONT WIPER AND WASHER SYSTEM PFP:28810
Components Parts and Harness Connector Location AKS000Y6
System Description AKS000Y7
All front wiper relays (HI, LO) are included in IPDM E/R.
Wiper switch (combination switch) is composed of a combination of 5 output terminals and 5 input terminals.
Terminal combination status is read by BCM when switch is turned ON.
BCM controls front wiper LO, HI, and INT (intermittent) operation.
IPDM E/R operates wiper motor according to CAN communication signals from BCM.
Power is supplied at all times
through 40 A fusible link (letter F, located in fusible link box.)
to BCM terminal 7,
through 20 A fuse [No.74 located in IPDM E/R (intelligent power distribution module engine room)]
to front wiper relay [built in IPDM E/R (intelligent power distribution module engine room)]
through 15 A fuse [No.73 located in IPDM E/R (intelligent power distribution module engine room)]
to IPDM E/R (CPU).
When the ignition switch ON or START position, power is supplied
through 10 A fuse [No.1 located in fuse block (J/B]
to BCM terminal 35 and.
through 10 A fuse [No.80, located in IPDM E/R (intelligent power distribution module engine room)]
to front wiper relay [built in IPDM E/R (intelligent power distribution module engine room)] and
to front wiper high relay [built in IPDM E/R (intelligent power distribution module engine room)] and
through 10 A fuse [No.87 located in IPDM E/R (intelligent power distribution module engine room)]
through IPDM E/R terminal 18
to front washer motor terminal 2.
Ground is supplied
SKIA3235E
-
has anyone got a view of the IPDM E/R . the service/parts cd i have does not have this file in it,i want to know what relays/fuses operate the wipers.or if anyones have stopped working,how did u cure it. cheers
I have it on screen now, how can I get it to you?
The car you drive determines where you sit in society...
in Off Topic Discussion
Posted
Worst section of motorway I have found is the M1 northbound between Milton Keynes and Watford Gap for the outside lane hoggers, do what i do use the inside lane it's generally clear!