Jump to content

Hodaka

Members
  • Posts

    661
  • Joined

  • Last visited

Posts posted by Hodaka

  1. I don't know much about these as I have a DE, but:

     

    NISMO Dual Cold-air Intake for NISSAN 350Z HR (2007-2009)

    http://www.ebay.co.u...ZMAAOSwr7ZW3tA7

     

    As I say I don't know anything about them, e.g. cost, desirability, if parts are missing etc... but 2 days left with 1 bid at £20. Sounds like you can get in there at the last minute and snap it up. :)

     

    Note the £10 delivery and the fact the seller has 0 ratings as a seller.

     

    My first post about findings. Hopefully it's not useless garbage! :headhurt:

    • Like 1
  2. Hey guys,

     

    I have a set of headlights without the connectors. I don't know the technical name for it but I'm looking for the headlight connector/harness/loom for both left and right headlights. I need the side that's on the headlights, i.e. male side, that's mounted on the headlight itself:

     

    20160229_224940_zpsxy1pfl0q.jpg

     

    Second-hand preferred. The wiring needs to be present as I need to solder them onto the loose wires on the headlights.

     

    If there's better solution, e.g. you can buy the connectors and stick wires in yourself, I'm all ears :)

     

    Not sure if it matters, but it's the OEM Xenon headlights I'll be connecting with the halogen high beams.

     

    Thanks in advance! :thumbs:

     

    P.S. I'm going to drop ZMANALEX now as well.

     

    Hodaka

  3. My friend (based in Church Crookham) does it on the side and I think charges around £300 for prewash, wash, clay, correction, wax and sealant. You'd have to check with him about exact details, e.g. if it's a 1/2 stage correction etc... but I know he's meticulous and takes a lot of pride in what he does. :thumbs:

     

    Let me know if you want me to send over his contact details so you can ask questions etc...

    • Like 1
  4. Paperwork required to register non OEM cars are a ballache. TDN numbers, Nissan factory, autech factory, omori factory.

     

    Sheesh.

     

    It's easier to smuggle in heroin than it is to register a limited run JDM only car in the UK.

     

    Was checking out your Photobucket and saw this photo:

     

    FB_IMG_1452111879140_zpsb9ydpso1.jpg

     

    :lol: :lol: :lol:

    • Like 1
  5. I've been looking into fiddling with my headlights recently as well actually.

     

    This post might help in terms of placement of the LED if you're going for a single LED set up. I only glanced over it before, but the thread in general may be useful:

     

    http://my350z.com/forum/exterior-and-interior/399820-03-05-headlight-mod-9.html#post7973773

     

    Also I haven't read this in full and it's on a 06 headlight as well, but there maybe some useful info on this thread:

     

    http://my350z.com/forum/body-interior-exterior-and-lighting-diy/545974-06-headlight-mods-the-thread-of-all-threads-many-pix.html

     

    Been practicing making halos as well. Bought the stuff prior to realising they're quite cheap to buy online.

     

    My first attempt (dimmer & messier) and second attempt below. As I say, just practice so it's messy wiring / haven't measured to size / no reflective backing etc... etc...

     

    20160217_221652_zpse3voxkux.jpg

     

    20160217_221409_zps95ool9c3.jpg

     

    20160217_221423_zpsgvcy1hsa.jpg

×
×
  • Create New...