Jump to content

Mike_89

Members
  • Posts

    303
  • Joined

  • Last visited

Everything posted by Mike_89

  1. I have had a little look to check if I can see these gear points. They are easy enough to locate and adjust. If you look at the headlight they have clearances between all directions of the xenon lamp unit, which suggests that they can be adjusted in all directions to change the light pattern. Please correct if this is not the case!!!
  2. I have pulled this directly from the workshop manual.
  3. I am glad that I have found this. Do the US spec headlights come with this gearing to adjust the headlights to drive in the UK?
  4. http://www.350z-uk.com/topic/37192-is-it-really-a-renault-engine/
  5. These are a scam, I can't believe they still make them after all the testing that has been carried out on such devices. These types of devices are adding additional load to your cars electrical system by claiming they can save you energy??? The device is claiming to clean your cars power system, how????? If you opened these devices they would be nothing more than a couple of resistors and LED and a cheaply manufactured circuit board.
  6. I had this problem, changed the battery. Now its fine.
  7. Its nice when people appreciate the zed
  8. Is it possible to get a mortgage to build your own place then?
  9. Roughly aiming for 400rwhp as advised by a few forum members & Mark @ Abbeymotorsport
  10. What sort of power are you guys looking for at the wheels?
  11. Ok, what's next?, ....is everyone going FI getting a fuel pressure regulator? The fuel pressure regulator is included in the likes of the AAM and CJM kits. Plus you get a little pressure gauge.
  12. This makes more sense haha. Cheers
  13. From what I can gather reading the Vortech reliability thread ( http://www.350z-uk.com/topic/82588-vortech-supecharging-technical-and-reliability-thread/ ) GT4 Zed and Sam Mcgoo are both using the Rutland oil catch can/tanks. From what I can tell it isn't baffled at all and the only problem mentioned is that GT4 Zed has had a slight leak on the bottom of his from where you drain the oil. I am unsure why you would need a baffle in the catch tank. The only thing that I can find is that it is to prevent oil being drawn through the intake manifold, and only allowing vapours to flow through this system. Correct me if I am wrong about this. I haven't actually considered an Oil Catch Tank
  14. Just keep it up. I had my original costing pretty high, but made this smaller by breaking it into mini projects. I am currently in phase 1 which ensures that I can run 400 rwhp safely.
  15. Well I see that you've finally decided what your doing, look forward to seeing your incarnation.
  16. Mike_89

    Plenum.

    http://www.350z-uk.com/topic/85914-lyndseys-350z-im-only-going-to-paint-the-wheels/ Check out lyndseys build☺
  17. This might help explain the problem a little more http://www.mossmotors.com/SiteGraphics/Pages/ethanol.html
  18. I agree with the this can't be genuine, but its always worth an ask about it, plus this with a positive feedback rating. I would say that you will struggle to get a FRS for a tenner haha. I've just put a deposit down for the stage 1 cjm kit, will get that next month along with a few other items. I will keep my eye out for a kit, you looking at a stage 0 or 1?
  19. No idea how they do it. Pretty sure you just need the above oil cooler kit though plus the thermostatic sandwich plate which can be bought from Mishimoto UK for around £100. Here's one on eBay for less than £100 though; http://www.ebay.co.u...=item338f4941b0 Or Mishimoto UK; http://www.mishimoto...wich-plate.html Both kits are the same apart from the thermostatic sandwich plate. This still works out cheaper than purchasing the cooler kit at £400.00 . Its amazing, I think eBay is great. Its just keeping your eyes peeled and look for bargains really. If your unsure send a message to the seller to double check the item is legit and this way you have a little bit of back up if it goes wrong.
  20. Haha. Seems like a good quality kit, and that's just the bracket.
  21. I have received the first item of many to come today. I thought I would share the opportunity to grab a bargain, as I thought it wasn't going to be the right kit for the price. I was clearly wrong http://www.ebay.co.uk/itm/FREE-SHIPPING-Mishimoto-Nissan-350Z-135-83-/151298717805?_trksid=p2047675.l4066 If anybody is interested in purchasing the above kit. The item was ordered Friday 30-May-14 and received this morning 02-Jun-14. It is well worth the price IMO.
  22. Me too when I see either 350/370 +2
  23. Welcome along. You will love the zed. I am based in Hull, there are a few others on the forum which are from Yorkshire area
×
×
  • Create New...