Vlad

I earthed mine to the metal frame behind head unit, where you put screw to hold your centre console in place no relay required! Sorry, I'm no help with handbrake gaiter, never removed it

Haha yet another way of doing things quicker

You don't need/have to connect it to your handbrake...just earth that wire somewhere behind head unit and it will work fine any time

It's flux capacitors!

Happy birthday mate

As above, spotted 5 mins ago. Had forum sticker on boot lid. I was in 2nd lane as we queued up towards roundabout in my work, red transit connect, van. I beeped, but got blanked

Oh...looks like ill be planning my visit to zed shed in June/July then

Hahaha shut up you 2!

Hahaha 100% geek should be a detective lol

That is annoying, ....you need one of these... That's what I said to my mrs! Lol

Cheers mate, I did mention it above in one of my posts after KyleR said to check that thread out

Top mark is the best place! Just top it bit by bit until it gets there...leave it for few mins before each top up, to make sure it all goes down! Overfilling is not good

Tell me about it! Car will get a bit dirtier by next weekend! Bloody birds **** me right off as well...cleaned car on sat...as I was drying it - they sh*t on the bonnet...so I washed it off... Done it again yesterday, so I wiped it off with birds poo wipes...took it for a drive - and as I was 2 mins away from home - they done it again! On the bonnet and windscreen! Wiped it again...woke up today with a massive one on the bonnet...no trees around or anything! May be they just hate carbon bonnets? Lol soooo annoying

Haha well, we got both instructions now

working this weekend lol

Thanks to Alan for e-miling me instructions. Hope you don't mind if I upload them on here for other to use in the future

Have a look at the sellers other snow foam guns/lances. They seem to have ones to suit most pressure washers; http://www.ebay.co.uk/sch/m.html?_odkw=&item=271418709605&_osacat=0&_ssn=pressurewasherpartsuk&_trksid=p2046732.m570.l1313.TR5.TRC2.A0.H0.Xsnow+foam+lance&_nkw=snow+foam+lance&_sacat=0&_from=R40 @Vlad ~ Have you tried yours yet? Any pics? Haven't tried yet as had day off yesterday and thing arrived today...typical!

KyleR, thanks, I did look at it, but presumed it will be in 1st post ( it's on page 13 if anybody else needs it) Alanm, cheers mate! Will PM u my email, as one in above thread is different version to mine probably still same procedure to set mine... But never know

yea, jack the front of it up and undo the plug and take filter off and let it drain for 5mins. You can lower you car a bit while its draining to level it up a bit...but be carefull not to squash your bucket or whatever you draining into to but don't have to, as filter and sump plug located right at the bottom anyway

Drain it from the sump plug...take old oil filter off... Put new one one (put a bit of oil on rubber ring on the filter). Put sump plug back in with new crush washer...put 4.7ltrs of oil in...check oil level with dip stick. 10mins job if that

Thanks anyway:) at least I now know that it needs calibrating Yea, tried googling, but couldn't find anything Found 1 video without sound and Arabic sub titles...not much help to be honest haha

haha :p

Hi all, just bought D1 controller off a member on here. Already fitted it, but is anyone has a manual for it (as it didn't come with one). I need manual just to know how set it to a different setting...i mean if it just the case of pressing button on it until it goes to a different mode, or do I need to turn angine off/on, do i need to callibrate it after its been installed on my car for the 1st time etc etc etc So if any of you know how to...please help Thanks Vlad

haha ^^ beat me to it

pretty cool! i guess it based on this stuff