rm cya

perfect mate, pm sent! thought i had 25 on the rear, measured today when fitting the Eibach springs and its only 20mm. popped to halfrauds, picked up their 9.5mm spacers, but not comfortable with how they fit. put them on the inside of the eibach spacers, but not enough thread on the lugs for the spacer nuts.

anyone stock them on here? or know where to get a decent set from? preferably hubcentric!!

anyone stock them on here? or know where to get a decent set from? preferably hubcentric!!

UPDATE: Car lowered on Eibach Pro 30mm springs. looks a great drop, sorted out my wheel gap issue. Was dark when we finished so no pics till tomorow! oh and fitted some sexy orange sidelight bulbs, which took the same amount of time to fit as the springs did, but with alot more swearing involved!!! :bad-words: especially after the old sidelught bulb fell out of the holder into the headlight and we were fishing around with picks, thin grabbers, then eventually found a thin bendy magnet to get it out. USDM! orange sides + no plate FTW! (no its not danage/marks on the front, its a reflection of the garage) will get proper pics tomorow

UPDATE: Car lowered on Eibach Pro 30mm springs. looks a great drop, sorted out my wheel gap issue. Was dark when we finished so no pics till tomorow! oh and fitted some sexy orange sidelight bulbs, which took the same amount of time to fit as the springs did, but with alot more swearing involved!!! :bad-words: especially after the old sidelught bulb fell out of the holder into the headlight and we were fishing around with picks, thin grabbers, then eventually found a thin bendy magnet to get it out. USDM! orange sides + no plate FTW! (no its not danage/marks on the front, its a reflection of the garage) will get proper pics tomorow

Ive put enough of my hard earned towards this thank you very much.

Stephen Lawrence?!! Seriously???? Ffs.

Cheers mate!! Black does look sexy polished!! Next clean is going to be a clay detail and machine polish to get rid of the notorious swirls you get with black paint, especially Japanese paint!! Will do mate! Was meant to today but haven't had the time!!

didnt manage to sort the lows out this weekend. gave it its first proper clean instead. ill get the springs done in the next few days. heres a quick couple of snaps i took. after taking these, Autoglym gloss sealant added to the bodywork and tyre shine was added, too dark to take pics though. its come up even better! apart from a few stonechips on the front end, its absolutely immaculate! Loving the car, and loving the new noise !! Nismo system with unsilenced decats sounds the dogs danglies!!!!! had nothing but compliments from friends and randomers about the sound! will get an outside video/driveby asap

heree you go mate, quick vid from inside the car viewtopic.php?f=34&t=56820&start=15

quick update: Decats fitted. nice easy and straight forward. no rusted bolts, and the handy snapon battery gun and long extension came in handy. took about an hour overall on the driveway. managed to get away with just 1 side jacked up. what a noise!!! at first i thought it was a bit too much, but now im loving it!! and from outside the car, apparantly it sounds absolutely nuts! loud, but not stupid and chavvy, more meaty and WTF is that!!? Heres a quick couple vids from inside the car, didnt manage to get one from outside. Both 2nd gear pulls from about 2k rpm hopefully sort the lows out tomorow

cheers mate

All done. Simple job. Got away with jackin up one side and doing both. Bolts weren't rusted at all, luckily my gun was still charged up so whacked on a long extension, got 2 bolts either side from up top (moved the intake pipe out the way to get easier access, left airbox in, just the pipe came off), the rest from underneath. Took about an hour in total. As for sound.... Nismo with Unsilenced decats.... Have a guess! Lol. will try get a video ASAP, possibly tonight.

yep. hopefully the bolts arent too rusted. will update later today

bought my Zed by instant internet transfer sitting in his living room whilst filling out the v5.

Japspeed decats have been delivered, with gaskets and bolts should hopefully have these on tomorow, will try get a video of before and after with the Nismo

they did indeed mate! much appreciated!!! ive been away in Italy since the 1st, only just got back in, so made sure someone was in to recieve them. big thanks to CS for the great service, communication a rapido delivery

Update: Parts have Arrived hopefully fit them tomorrow/saturday weather dependant. will get some before and after videos for the sound + pics for the lows

i say keepsie, but im no mod doubt it will cause an argument on here, seems like a good bunch of people inc the mods

Yeah he was on the civic forum I'm on, 10penceshort or something like that iirc. No worries mate! To be fair to the op, his driving looks under control and I'm sure he knows what he's doing.

ahhh, my bad! in slightly better language: i dont see why really nice people off other amazing forums get annoyed/moan about videos that get posted up just because they slid it a bit, and put their foot down to show what the TT can do. everyone presses the loud pedal now and again surely? otherwise we'd all drive hybrids as our only cars. (this ok? )

[mod edit: this forum does not tolerate slander towards another forum, or the language you used. Lexx]

Ahh cool, thought they might be the same ones.

Tempted to order them, but as you say I know the welds might be a bit dodge. But how hard is it to weld a flange on a bit of tubing?? Lol What size bore decats do people run, as this one and the japspeed one is 2.3" (60mm). Seems a bit small for the engine?? I thought they would be a minimum of 2.5".

I'm also interested in this! Also I'm guessing the different facia is required to fit it if you have the lift up lid cubby hole.