HassanZ

I used to own the Lexus IS200 also, the rear lights were glass. Zeds come with plastic headlights so it would need to be treated differently in comparison to Lexus IS200 taillights...

Did that not take a while on speed 2? Thats rather slow! Normally use speed 2 to spread the compound about and then work up to 4/5 to work it in on my DA6, then back down to 3 to burnish it at the end when the compound has done its stuff. Sorry for the late reply Chris, didn't realise you replied Apologies, my bad! You're right, I used speed 2 to spread the ultimate compound around then increased the speed to 3/4 (I've got a bad memory!). I didn't keep it on too long just incase I overheated the plastic and damaged the lens permanently. On the bodywork I used speed 2 to spread then speed 5 to buff. My headlights are beginning to haze again. Considering I wax them often, they have started to haze again VERY quickly. Might need to pull out the polisher again soon...

From the inside, the noise sounds very similar to mine. I'm not sure from the outside, as I've never stood outside the car whilst the clutch is being pressed/depressed. When you switched off the car, mine makes the same type of rattle sound as yours did.

dude you can't be +1ing a comment thats already been +2'd Yeah £12 fleabay happy days.........you might even get a crappy microfibre thrown in. HAHAHAHAHAHA! Didn't even realise!

You've got exactly what I used to have on my headlights. I used Meguiars Ultimate Compound on my Kestrel DAS6 polisher on speed 2. The headlights came out brand new!! They will need doing again soon though... Have a look at my detailing thread for further details: viewtopic.php?f=22&t=48935&hilit=hassanz

+1 Gliptone!

Thank you for adding them for me, it is very much appreciated! By mistake I called the Y-pipe Kinetix, it was actually meant to be Japspeed...

I have a pair of standard cats in great condition which I purchased for £140 thinking they were HFCs when apparently they're not! Let me know if you're interested in taking these off Me. I can't split them though unfortunately. Thanks, Hassan

or CS

Quick question. After fitting my pop charger, I couldn't find a way of securing the black wire with the plastic ridged outer casing that runs behind the filter to the back of the filter so I've left it unsecured. There is a plastic clip on this wire which is supposedly meant to clip onto the filter somehow. Anyone know how its done? Thanks, Hassan

Is it possible we can add the following: D1 spec aluminium wheel nuts Toyosport stainless steel exhaust and mid-pipe Kinetix Y-pipe Eibach wheel spacers Tonneu cover 350z-uk club stickers Nismo rear bumper spats Many thanks, Hassan

viewtopic.php?f=10&t=51283 Here you go lads

Are the clips on the ash tray in tact? My clips are currently broken and the ash tray wobbles around inside the hole. Doesn't really bother me as it doesn't rattle when I'm driving. But if you could do a good price, I may just have it off you Are there any scratches present? Has it ever been used for cigarettes? Many thanks, Hassan

Do I have to create the team first before entering our league?

He was being naughty (took his pillow as promised) so they gave him a 1 day detention. He has to write lines

You will not have a problem with regards to the temperature of the water but the actual volume of water (either hot or cold) flowing through the taps elsewhere when someone is in the shower. I don't see you having a problem with a combi boiler in a 3 bed house with 1 bathroom, I know plenty of people with the same set-up. It all depends on the water supply itself and the quality of the boiler in my opinion...

We've got the full Nismo kit on the list apart from the rear bumper spats, could this please be added?

I reckon the 5.5 hours is bullsh*t and the mechanic probably just wanted to be paid for sitting there drinking coffee and twiddling his fingers, as he couldn't be asked to fiddle around with the exhaust or wasn't competent enough (I apologise if this mechanic is on this forum or if I've offended anyone with that comment). I just find it hard to believe somebody sat there fiddling around with an exhaust for 5.5 hours, I would have given up within an hour if it was that awkward. It took the guys an additional 15-30 mins to sort the issue out. All-in-all I was charged £80 to fit the full exhaust system. I personally wouldn't have gone for the Toyosport exhaust if I hadn't got it free due to the sole reason that there aren't enough people with them on. Now that it's on and didn't cost a ridiculous amount to fit it, I am very happy with the exhaust. The noise and looks are just perfect! The fact that no modification was required to the car itself to allow the exhaust system to fit (i.e. removing the diff shield), highlights it weren't extremely awkward to fit.

Chris, it's a good idea you're not allowing members to input their own mods. I could see this getting very messy!

'DBA 5000 Reries Rotors' is spelt incorrectly Spelt properly in the list, thats my dodgy typo from the copy and paste again Although I quite like the sound or Reries Rotors - sounds like Scooby Doo Also 99.9% sure GT Spec did a carbon brace, I think there was one as a raffle prize one year Just realised when I added that on my mods list Yeah it does actually sound quite cool as well!! Any updates on my 'CHEAP' Toyosport exhaust system and 25/20 Eibach spacers...?

'DBA 5000 Reries Rotors' is spelt incorrectly

'DBA 5000 Reries Rotors' is spelt incorrectly

viewtopic.php?f=31&t=52049

Toyosport Mid-section Toyosport Backbox Eibach wheel spacers OEM LED Tail Lights LED Sidelights LED Number Plate Lights Carbon Fibre B-pillars Nismo Rear Spats OEM Splash Guards OEM RAYS Wheels S2000 Stubby Aerial Aero Wipers Club Stickers D1 Spec Aluminium Wheel Nuts Bridgestone Potenza 050A Tyres DBA 5000 2-piece Rotors Ferodo DS2500 Brake Pads Brembo Calipers Alezan Leather Bluetooth Car Kit OEM 350z Floor Mats Anti-slip Boot Mat Tonneau Cover Richbrook 350z Aluminium Tax Disc Holder These are from my signature and some may not be applicable

I was given a brand new Toyosport exhaust system in a box with my car when I bought it. I wasn't sure how it would be but I bit the bullet and got it fitted by some mates at Santa Pod. Yes there was a fitment issue which was overcome within half hour. The exhaust looks and sounds great paired with my Kinetix HFCs. Even without the HFCs, the system sounded similar to OEM with a slightly more aggressive sound. I am more than happy with my decision. There are a few members on here who have seen and heard it in person. I've not heard any negative comments so far. The build quality of the exhaust itself is identical to other 'higher quality/expensive' exhausts. To be honest people shouldn't make judgements or provide an opinion and scare other members off from buying it, if they personally haven't seen it. It would be better to forward the potential purchaser to someone who's actually had experience with a specific product (in this case the Toyosport) for a more accurate opinion don't you think? PS - Matt paid me a visit over the weekend and went for a spin with me in my Zed. He will now have a clearer opinion on these exhausts.