Jump to content

planetsurfer2

Members
  • Posts

    340
  • Joined

  • Last visited

Posts posted by planetsurfer2

  1. +100 and some ^^^^^

     

    There are no cheap ways of making Z's go quickly.

     

    If you are using stock internals

     

    Supercharger build will cost between £3500-10000+ depending which kit you use and if you can do the work yourself or you need a specialist to install it.

     

    Add another £3-4000 for a twin turbo build.

     

    A complete engine rebuild will start at £3000.

     

    It's a lot cheaper to make other cars go quickly. :dry:

     

    But it's hard to beat the smile a twin turbo Z gives you. :D

  2. Is this good? :D

     

    Quote from Mark "On the dyno most of the map is sorted at the boost pressure we are running at the moment 0.35/0.4bar (5.14 psi/5.88psi) we are seeing 415bhp @ the hubs

     

    What is impressive at this low amount of boost is 340lb/ft torque @ 2000rpm 350lb/ft torque @ 5000rpm and 3000lb/ft torque @ 7000rpm."

  3. Wizard, mine was a 2006 UK REVUP.

    Abbey have had a few cars that have definitely run on RON 95 and have significant piston damage.

    Mark figured out there is no knock protection over 4600RPM on a standard map during his UPREV work.

    If you haven't run your engine hard over 46000RPM with RON 95, you're unlikely to see a problem.

×
×
  • Create New...