Wheel fitment..... Help please guys!!

[Elliot350]

Hi guys,

 

Have decided what wheels I want for my zed! But need help with the fitment as I plan on running 11j rear and 10j front for a nice bit of concave... Was thinking 11j et32-35 for the rear? Or maybe a lower offset? And for the front something like 10j et35 aswell? If anyone with 10j fronts could shed any light on this that would be great also the guys with 12j rears what kind of offsets are you guys running? Don't want to carry out major arch work a quick arch roll is fine but no pulling or custom arches etc.

 

Sorry for all the questions but don't want to spend almost 2k on wheels and wait 8 weeks for them to be made only for them not to fit!

 

Hope you guys can help me.

 

Cheers

Elliot

[Hell presidente]

I'm running rota GTR-Ds 18x10j et12 front and 12j et20 rear, wound down on coilovers with no arch work, 1.5 degrees neg camber front and 3 degrees rear.

[JetSet]

Caroline has this setup on her Zed, 20 inch wheels 10J front ET 25, 11J rear ET (not certain but I think 28). First thing to check is that they're going to clear the brembos and will they require spacers, Caroline's wheels needed a 10 at the front.

 

 

 

Pete

[GMballistic]

^^ Gorgeous look to that Zed Pete.

[Elliot350]

Thanks for that guys I think 11j et30 will be what il go for on the rear and 10j et25 I plan on 2 degrees camber all round for a bit of dare I say it stance.... Soon as I have the money will get them ordered up!

[brillomaster]

have a look at rimtuck.com then search for 350zs with the size wheels you're thinking off, should give you a good idea of offsets.

[Bodyboarder81]

I think those offsets are to weak ..... Should go for around 20 front 15 -20 rear

[veilside z]

Where are you getting the wheels made as I was looking too.