P0340

[rodgeevans]

Hi Guys and Girls.

 

Wondering if anyone who has had a P0340 Error before can help.

 

Basically the car stalled and when restarted the slip, tcs and CEL light were all on.

Did a bit of research and search on here and checked the brake fluid etc, then did the code reading pedal dance and got the code P0340 cam sensor bank 1.

 

so my question is can anyone tell me which side the P0340 refers to I believe it is the drivers side but would like confirmation if possible

 

thanks in advance

Edited September 18, 2013 by rodgeevans

[cs2000]

Correct, bank 1 is drivers side.

[Jez @ H-Dev]

Got the sensors in stock if you need one

[rodgeevans]

Many Thanks guys much appreciated, will give you a PM later in week Jez.

[Mack]

I had the same issue, I wrote about it here

 

http://www.350z-uk.com/topic/70130-odb2-code-0340-cam-shaft-position-sensor-phase/

 

It's a quite straight forward DIY job to change.

[ZMANALEX]

Hi Rod,

 

Genuine Nissan new and preowned CPS are in stock and good to go same/next day.

 

You have PM mate.

 

Alex.