LordSQra Posted January 26, 2013 Posted January 26, 2013 Hi, I have a problem with my door lights they never worked since I bought the car. Finally I found a time to change fuse which I believe is "room light" so I pull it out and seems that fuse isnt blowed so I put it back and then problem starts. My alarm is going crazy when Im putting fuse back. Any ideas please ? ! Quote
Sly@Kaizer Motor Posted January 27, 2013 Posted January 27, 2013 Room lights (just like almost everything in the car) switched by your BCM (Body Control Module) and it's also giving signals to the factory fitted alarm. Your best options to check data monitor with Consult (or other capeable code reader/scanner). Quote
glrnet Posted January 27, 2013 Posted January 27, 2013 As Sly says, get it checked with a code reader, sounds like your BCM could be the problem, if it is Quote
ZMANALEX Posted January 27, 2013 Posted January 27, 2013 Thank you for the referral Graham: BCM units in stock if required. What happens when you have the fuse removed and what does not work with the fuse removed? Do you have the light switch (in roof) in the correct position? Make sure that your battery is fully charged as that can make the alarm have a wobbley if in a discharged state. Do your resets or disconect the battery for half an hour. Alex. Quote
LordSQra Posted January 29, 2013 Author Posted January 29, 2013 thank you guys for your replay @ZMANALEX basically when the fuse is removed lights in the roof, light round the ignition and door lights dont work. Yeah the light switch in the roof is in correct position, I also tried to put fuse while doors were shut but that did not help either. I dont know how to do a reset but I've just disconected battery, I put fuse in and hope it will work or do I have to disconect battery and after when its connected than put te fuse in ? Many thanks guys !! Quote
LordSQra Posted January 29, 2013 Author Posted January 29, 2013 Disconnecting battery did help and alarm stopped going crazy all lights back to normal apart door lights which still dont work but it might be broken bulbs on both side. Could you please tell me what does Electronic Parts BAT do ? Thank you Quote
Watshot Posted January 29, 2013 Posted January 29, 2013 If you mean the red reflectors on the doors, they are reflectors, they look like they should light up but they don't.....because they are reflectors. There are no puddle lights and no other lights on the doors so I assume that this is what you think should light up? Quote
M13KYF Posted January 29, 2013 Posted January 29, 2013 If you mean the red reflectors on the doors, they are reflectors, they look like they should light up but they don't.....because they are reflectors. There are no puddle lights and no other lights on the doors so I assume that this is what you think should light up? excellent point! Quote
LordSQra Posted January 30, 2013 Author Posted January 30, 2013 If you mean the red reflectors on the doors, they are reflectors, they look like they should light up but they don't.....because they are reflectors. There are no puddle lights and no other lights on the doors so I assume that this is what you think should light up? yeah they look like they shoud light up lol I would never thought that they might be just reflectors so looks like the problem is sorted lol. Thank you once again guys for helping me !! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.