Jump to content

Recommended Posts

Posted

Not sure, but think someone as pushed my rear wiper last night. Its now about 8 inches down the window! :rant: Bigger problem is that when I tried it the wiper now goes off the window and over the boot :angry: Anyone know how I can rectify this?

 

Thanks in advance.

Posted

It will have just been rotated slightly.

 

IIRC you can pop off the cover where it meets the car, slacked off the nut and reset in the correct position and tighten up.

Posted

Take it off and refit it in the correct position on the spline. If it still has the full sweep (as implied by continuing over the boot) then you should be okay. Probably just slipped on the gear when/if it was pushed.

Posted

These are always a nightmare on cars to get off, the splined shaft is usually alloy and corrodes. WD40 and a bit of leverage - although careful with levering. Also hitting it gently with a hammer helps.

Posted

Had another go at this today, and success :thumbs:

Covered the body work with a thick towel, used claw hammer under wiper to lever off spindle, perfect. Moved wiper blade to correct place, reattached and all done in 5 minutes. works perfectly again. Thanks for your help again!! :thumbs:

Posted
Had another go at this today, and success :thumbs:

Covered the body work with a thick towel, used claw hammer under wiper to lever off spindle, perfect. Moved wiper blade to correct place, reattached and all done in 5 minutes. works perfectly again. Thanks for your help again!! :thumbs:

 

Result! :thumbs: Levering it off is always a bit daunting! But glad it all worked out!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...