Chuck21 Posted September 23, 2011 Posted September 23, 2011 Hi, I'm hoping for some advice before I make my first attempt at detailing the Z; current plan is as follows: - Rinse then wash (Megiures gold/lambswool mit/two buckets) - Clay bar then rinse & dry - Paint clean (Meguires deep crystal) - Stage 1 polish (Autoglym super resin) - Stage 2 polish (Autoglym extra gloss protection) - Finish with Megiures tech-wax My main questoins are 1. is this the rihgt order to be doing it all in ? and 2. do I need the Autoglym EGP AND the tech-wax or should I replace the EGP with another coat of super resin polish ? Thanks in advance! Charlie Quote
Zugara Posted September 23, 2011 Posted September 23, 2011 Pm Tim at envy, trader on here.top bloke for advice,you forgot to snow foam first, Quote
AK350Z Posted September 23, 2011 Posted September 23, 2011 Order is fine. The EGP is a sealant, so it does go on before the wax. Quote
Wasso Posted September 23, 2011 Posted September 23, 2011 I'd recommend applying the wax as a hand applied hard wax. Lasts longer far longer than a liquid wax. Quote
Chris`I Posted September 23, 2011 Posted September 23, 2011 If you're just starting I recommend a wash followed by a quick polsih (SRP) and a sealant (EGP) or wax. I wouldnt recommend trying to do too much unless the car is garaged and you can spend a few days on it. Polishing it for the first time will take a couple of hours and claying it will take the same first time around. You dont want to be doing both for the first time. Leave claying for just after winter when you are happy with washing, polishing and waxing/sealing Quote
ghunt222 Posted October 6, 2012 Posted October 6, 2012 For information and products regarding detailing i always use cleanyourcar.co.uk. There is a forum section on there which provides lots of useful information and the service I have received is always top notch. Hope this is of some help. George. Quote
gillywig2 Posted October 6, 2012 Posted October 6, 2012 http://www.detailingworld.co.uk/ is a great site. It's a slippery slope to OCD! Quote
glrnet Posted October 6, 2012 Posted October 6, 2012 http://www.detailingworld.co.uk/ is a great site. It's a slippery slope to OCD! We call it Zeditis Quote
dragon Posted October 6, 2012 Posted October 6, 2012 I normally get my stuff from ultimate finnish the've got all the top brands Quote
ThriftyFifty Posted November 3, 2012 Posted November 3, 2012 I personally would repeat the wash after clay barring... as you might get surface dirt hanging around after you've agitated it off with the clay. Quote
ddcboyle Posted November 4, 2012 Posted November 4, 2012 Get some meguirs on the exhaust tips shiny shiny. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.