DUKE Posted August 21, 2011 Posted August 21, 2011 Hi I intend to make my own Plenum spacer (just a one off for my '03' Z), after a lot of research I have decided to use 8mm NYLON 6...... Any thoughts or recomendations on other materials ? Thanks in advance Quote
Neilp Posted August 21, 2011 Posted August 21, 2011 Why go through all the hassle? They're pretty cheap to buy. Many people have tried and given up. It has to withstand alot of heat and keep a complete air tight seal. Quote
Tricky-Ricky Posted August 23, 2011 Posted August 23, 2011 I agree, however there is one way that i think would work, get yourself a spare plenum top, find a friendly engineering shop and ask them to mill the top of to the right hight Quote
flyboy Posted August 23, 2011 Posted August 23, 2011 My laser cut aluminium one worked fine viewtopic.php?f=25&t=44039 Quote
DUKE Posted August 26, 2011 Author Posted August 26, 2011 I have the Nylon6 and it can take a lot more punishment than the plenum can dish out. It cuts nicely with a jigsaw but was wondering if I could get the DXF file as I could get it machined at work, we have the machines but no scanner and would take far too long to program. I have a spare upper plenum which I am spraying in a light gunmetal and will be a straight swap job so the car isn't out of comission whilst waiting for the paint to dry. Quote
flyboy Posted August 27, 2011 Posted August 27, 2011 Hi There, I now have plans to cut these and sell a spacer kit, as the velocity stack project with RTCustomz was such a sucess. Therefore the dxf is no longer up for distibution. Good luck with your project. Quote
DUKE Posted August 27, 2011 Author Posted August 27, 2011 Thanks anyway............I truely understand. GOOD LUCK in your venture Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.