BLINDS122000 Posted July 27, 2009 Posted July 27, 2009 hi guys wanting to wack a induction kit into my 350z but not wanting to much. I have the dual intakes but dont want to be spending over 200 quid. seen this kit and wondered whether it would work for the dual intakes by buying two and flipping the 2nd intake so it would fit on the left handside? http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... =WDVW&rd=1 Would this fit or work? cheers alex Quote
rtbiscuit Posted July 27, 2009 Posted July 27, 2009 no that won't work, you'd loose all your water bottle resevouirs. as i think that one sits down in the wheel arch. if not it might work. your best bet is the JWT setup. its one of the few actually designed for the twin intake. Quote
M13KYF Posted July 27, 2009 Posted July 27, 2009 I'd stay clear of cheap one. The last thing you want is water being sucked through due to some cheap mod. Go with something more tried and trusted. In the end it will be cheaper. Quote
Ekona Posted July 27, 2009 Posted July 27, 2009 The car is worth what, £15K at least, and you want to be putting on £40 worth of cheap-ass eBay tat on the most important part of it? I can understand saving money where possible, but it's a got a thumping great 3.5L V6 so a couple of hundred quid on intakes pales into insignificance when you think about how much the fuel is going to cost you Quote
Gaz Walker Posted July 27, 2009 Posted July 27, 2009 I can only concur what the others have said, please don't put a generic piece of Ebay tat on your fantastic car... Let me know if I can help Quote
SunZed Posted August 4, 2009 Posted August 4, 2009 these people talk sense. I understand where your coming from - you want that litle extra noise, for little extra money... Spend money to save money! - Meaning don't buy cheap toot then think, hmmm I think i'll upgrade to a proper one! - Buy the proper one straight up! Quote
Zedrush Posted August 4, 2009 Posted August 4, 2009 didnt max power do something regarding this, kinda like D.I.Y, think it involves drilling a couple of holes in your engine to let the air in, give it a try Quote
Chris`I Posted August 4, 2009 Posted August 4, 2009 didnt max power do something regarding this, kinda like D.I.Y, think it involves drilling a couple of holes in your engine to let the air in, give it a try OOoh, you are mean As the others have said, spend you money and do it right. If you cant afford a proper intake, keep it stock until you can. You dont want some cheap intake doing no filtering and knackering your engine! Quote
MSportUK Posted August 4, 2009 Posted August 4, 2009 Only an extra £60 over your budget for a proper one that won't shag your engine! http://www.jdmperformance.co.uk/item_de ... odID=59855 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.