Randy_Baton Posted Monday at 11:54 Share Posted Monday at 11:54 Steering starting making a whirring noise at the end of May, noticed the PS reservoir was at minimum so topped it up. That fixed it but it started again yesterday. Looked at the reservoir and can see the pipes just underneath it are damp. Looks like the leak is coming from the flex tube where it connect to the reservoir. Looks pretty simple with the wheel off? https://www.youtube.com/shorts/-V-IoQStZhU does this video apply to all Zeds (I'm a DE). I only have the jack that comes with the car though, so might ask my garage to do it when they change the brake discs in October. Are hoses also universal across all zeds? Quote Link to comment Share on other sites More sharing options...
Coz@TORQEN Posted Monday at 16:05 Share Posted Monday at 16:05 Attached a schematic below of the DE power steering hoses. Feel free to locate the specific one and drop me a PM so I can confirm pricing and lead time. Personally, I wouldn't be doing anything on the Jack the car comes with, at the very minimum stick some axle stands or blocks of wood as a safeguard under the sills. If they're already down there doing the brakes, I can't see them charging you more than 1 hour (at a push) to get this fitted at the same time. Quote Link to comment Share on other sites More sharing options...
Keith D Posted Monday at 16:35 Share Posted Monday at 16:35 Wheel cribs can be built from lengths of 2 x 4 in an afternoon. There is no excuse to go killing yourself. Quote Link to comment Share on other sites More sharing options...
Randy_Baton Posted 8 hours ago Author Share Posted 8 hours ago On 18/08/2025 at 17:05, Coz@TORQEN said: Attached a schematic below of the DE power steering hoses. Feel free to locate the specific one and drop me a PM so I can confirm pricing and lead time. Personally, I wouldn't be doing anything on the Jack the car comes with, at the very minimum stick some axle stands or blocks of wood as a safeguard under the sills. If they're already down there doing the brakes, I can't see them charging you more than 1 hour (at a push) to get this fitted at the same time. I think its just the rubber hose that comes from the right side of the reservoir. Looks like any hose cut to size would work. Fairly sure the leak is coming from where it connects to the reservoir. Looks like i might be able to change it from the engine bay. Getting the clips on underneath the reservoir will be a PITA though. Any idea what size hose it is? Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted 5 hours ago Share Posted 5 hours ago You require the correct hose for the pas. It is a high pressure hose and is also formed. I should have this in stock. Alex. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.