Jump to content
Sign in to follow this  
Oggieteepo

Touring Alloys [Sold]

Recommended Posts

Set of 4 Touring Alloys.

 

They're in ok nick, what appears to be curbing is really just lacquer coming off, so could do with a rub down and a spray, some Hi-Fill primer should be enough.

 

The Rubber, P-Zero's on the rear but they're dead and on the limit marker on the inner edge i think, only <1mm left of legal elsewhere before they hit the markers too at a guess.. The front are budget ditchfinders, prob got 2.5mm left but again they're budget tyres so that counts for very little on a car like this.

 

No Cracks or dents so fine for winters, or track/Drift.

 

Asking for £75 collected, less than £20 a corner!

 

(I got a bit lazy and forgetful with the photo's, hence the feet, so missed the username labelling off a few - sorry, hope this is still ok mods)

 

Edit: for thoes of you on mobiles etc.. They're Located near Chichester.

 

 

IMG_20170219_104244.jpg

IMG_20170219_104249.jpg

IMG_20170219_104256.jpg

IMG_20170219_104304.jpg

IMG_20170219_104315.jpg

IMG_20170219_104337.jpg

IMG_20170219_104408.jpg

IMG_20170219_104423.jpg

Edited by Oggieteepo

Share this post


Link to post
Share on other sites

:-)

 

I could send them via a paisley or something but realistically the cost of shipping vs the item wouldn't be worth it as they're supposed to be a cheap option...

 

 

Share this post


Link to post
Share on other sites

Quick query what is the internal diameter of these wheels? I'm doing a rear brake conversion and it looks like my current Ines are too small to fit the calipers. These might be an ideal solution. I'm even passing you twice next week.

Share this post


Link to post
Share on other sites

If I get chance later I'll pull mine over the pit at work and measure mine for you ☺ï¸

Edited by Chris141084

Share this post


Link to post
Share on other sites

Thanks Chris :)

 

I will also pop out and measure them for you. I left them at my parent a few miles away, as I don't have a garage but am going over that way anyway later.

Share this post


Link to post
Share on other sites

When I pulled a tape measure across it I measured 45cm, if you need me to be any more precise might have to go back lol

Share this post


Link to post
Share on other sites

Quick query what is the internal diameter of these wheels? I'm doing a rear brake conversion and it looks like my current Ines are too small to fit the calipers. These might be an ideal solution. I'm even passing you twice next week.

Get better wheels. These wheels weigh a ton, you'll kill the handling of the car along with accel and braking. By all means use them as a temporary get around until your better wheels come though.

Share this post


Link to post
Share on other sites

Cheers Ekona but that's my exact intention. I may not even need them. They are too narrow at 8J yfor me longer term anyway. There the right centre bore and PCD though and the offset is alright. Price is helpful as is the fact il be passing them and therefore collection is free.

Share this post


Link to post
Share on other sites

Cheeky offer of £50 collected? can come this weekend.

 

need some wheels to rest up the car while refurbish my currents... and then maybe, see how they look on my 300zx :)

Share this post


Link to post
Share on other sites

Cheeky offer of £50 collected? can come this weekend.

 

need some wheels to rest up the car while refurbish my currents... and then maybe, see how they look on my 300zx :)

 

Sent you a PM

Share this post


Link to post
Share on other sites

Sorry buddy just put Chichester in maps and don't think I could stomach a 5hr round trip! Who lives on the cost anyway!?!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

350z-uk.com

370z-uk.com

×
×
  • Create New...