Touring Alloys [Sold]

[Oggieteepo]

Set of 4 Touring Alloys.

 

They're in ok nick, what appears to be curbing is really just lacquer coming off, so could do with a rub down and a spray, some Hi-Fill primer should be enough.

 

The Rubber, P-Zero's on the rear but they're dead and on the limit marker on the inner edge i think, only <1mm left of legal elsewhere before they hit the markers too at a guess.. The front are budget ditchfinders, prob got 2.5mm left but again they're budget tyres so that counts for very little on a car like this.

 

No Cracks or dents so fine for winters, or track/Drift.

 

Asking for £75 collected, less than £20 a corner!

 

(I got a bit lazy and forgetful with the photo's, hence the feet, so missed the username labelling off a few - sorry, hope this is still ok mods)

 

Edit: for thoes of you on mobiles etc.. They're Located near Chichester.

 

 

Edited May 13, 2017 by Oggieteepo

[Chris141084]

If you weren't so far away I'd have these, I have a bent wheel and looking for new

[Oggieteepo]

:-)

 

I could send them via a paisley or something but realistically the cost of shipping vs the item wouldn't be worth it as they're supposed to be a cheap option...

 

 

[Chris141084]

Exactly, they are a great price and a bargain for someone a little closer than me

[Oggieteepo]

Not to worry matey, hopefully something will come up for you closer!

[Oggieteepo]

Still avail.

[Oggieteepo]

[z32bolt]

Quick query what is the internal diameter of these wheels? I'm doing a rear brake conversion and it looks like my current Ines are too small to fit the calipers. These might be an ideal solution. I'm even passing you twice next week.

[Andy_Muxlow]

I think they are 8.5j all round iirc.

 

 

Sent from my iPhone using a hammer and chisel

[z32bolt]

No no Andy, I'm after the internal diameter not the width. I think they are actually 8J these.

[Andy_Muxlow]

Ah right, can't help then sorry 🙂

 

 

Sent from my iPad using Tapatalk

[Chris141084]

If I get chance later I'll pull mine over the pit at work and measure mine for you ☺ï¸

Edited March 19, 2017 by Chris141084

[Oggieteepo]

Thanks Chris

 

I will also pop out and measure them for you. I left them at my parent a few miles away, as I don't have a garage but am going over that way anyway later.

[z32bolt]

That's great cheers guys. I'm coming your way Wednesday and Thursday.

[Oggieteepo]

When I pulled a tape measure across it I measured 45cm, if you need me to be any more precise might have to go back lol

[Ekona]

Quick query what is the internal diameter of these wheels? I'm doing a rear brake conversion and it looks like my current Ines are too small to fit the calipers. These might be an ideal solution. I'm even passing you twice next week.

Get better wheels. These wheels weigh a ton, you'll kill the handling of the car along with accel and braking. By all means use them as a temporary get around until your better wheels come though.

[z32bolt]

Cheers Ekona but that's my exact intention. I may not even need them. They are too narrow at 8J yfor me longer term anyway. There the right centre bore and PCD though and the offset is alright. Price is helpful as is the fact il be passing them and therefore collection is free.

[Oggieteepo]

Still available

[ZeeGy]

Cheeky offer of £50 collected? can come this weekend.

 

need some wheels to rest up the car while refurbish my currents... and then maybe, see how they look on my 300zx

[Oggieteepo]

Cheeky offer of £50 collected? can come this weekend.

 

need some wheels to rest up the car while refurbish my currents... and then maybe, see how they look on my 300zx

 

Sent you a PM

[Scully]

Still available?

[Oggieteepo]

Yeah, they're still about

[Scully]

Sorry buddy just put Chichester in maps and don't think I could stomach a 5hr round trip! Who lives on the cost anyway!?!

[Oggieteepo]

Haha, yeah there are a few of us down 'ere lol

[Gabor]

Hey mate, are these still available?