19's wheels on zed

[mattyp01]

Hi guys I currently have 18's on my zed lowered on tein springs ( 17mm front, 14mm rears) .

20mm spacers all round.

Looking into maybe getting some 19's

Will these fit ok without any arch work? help needed guys

[StevoD]

all depends on what wheels you get with what widths and what offsets

 

my advise would be stick to ro cloase to the following

 

front axle : 19x9.5 et 20 245/35/19

 

rear axle ; 19x10.5 et 20 275/35/19

 

will look similar to this although this is a bit lower

 

Edited July 8, 2016 by StevoD

[350zedd]

Varrstoen ES1 19x10.5 rear ET12 275/35/19

19x 9.5 front ET12 245/35/19

 

The pics show it lowered on Teins also with rear arch lips rolled.

I think its worth considering rolling the arch lips as its not a big job and looks ace!

http://www.350z-uk.com/topic/101343-another-new-wheels-thread/

[Jetpilot]

This might give you some help:

 

http://www.350z-uk.com/topic/79656-all-encompassing-wheel-size-offset-thread/

[veilside z]

Have you bought any yet?

[Panman]

I'm running et12 10.5 at the rear and even with negative camber you'll still need a slight rear roll.

 

[StevoD]

I'm running et12 10.5 at the rear and even with negative camber you'll still need a slight rear roll.

 

 

You on air?

[BulletMagnet]

Mine are Volk SF Challenge

Front 9,5j x 19 ET +28 245/35/19R

Rear 10,5j x 19 ET +23 275/35/19R

 

So basically it also depends what manufacturer and design you choose

Also on Tein springs like the OP

Edited August 7, 2016 by BulletMagnet

[Panman]

I'm running et12 10.5 at the rear and even with negative camber you'll still need a slight rear roll.

 

 

You on air?

 

Yes. Was on coilovers for many years. Decided to go air this year as i was doing more static shows. Tracked it as well and it's surprisingly good.

Edited August 9, 2016 by Panman

[mattyp01]

no not yet mate. still in two minds about going down the 19's route

[buster]

i opted to go back to 18s and stll had to roll the arches

 

 

9.5j front et10 255/40/18

10.5 rear et 10 275/40/18

 

 

 

Edited November 10, 2016 by buster

[mattyp01]

Love your wheels bud! what are these called? where u get them from?

[veilside z]

Bobs the dogs .. B) I think he got them from Chris at Tarmac