Arran Posted August 22, 2015 Share Posted August 22, 2015 (edited) Motordyne XYZ y pipe with resonator, if you know about motordyne you'll know this is easily the best y pipe available for a Z and don't come up for sale often because of the price and availability. A lot of research and development went into this making it the right length and shape, also for the swappable mid section in which you can have a straight pipe, resonator or sports cat (so you can run decats with still pass mot), I opted for the resonator as mot isn't an issue, tried the cobra y pipe before this it was ok but this is leagues ahead in terms of quality and sound. One flexipipe has a very slight scuff from a speed bump but motordyne use a double thickness flexi to ensure no common failures like the cheaper brands. Was on the car for around 7k miles. £350 collected Motordyne ART decat pipes, again these are the best decats available for the Z and not often up for sale. I tried some resonated decats from Horsham developments before and it was unbearably loud, swapped over to these and I couldn't believe the difference in sound quality (no rasp compared to other decats without a helmholtz resonator) and volume, easily liveable day to day. Were on the car for around 7k miles, brilliant quality and still in perfect condition. £325 collected Eibach 20mm front and 25mm rear spacers, went with Eibach because of the quality of the brand and research and development into their products, not worth cheaping out on a part so vital imo. We're on the car for about 9k. Will come in the original boxes to. £165 collected HSD dual tech coilovers, I opted for these over the monopro's because much like the E36/46 BMW the rear shock towers aren't designed to take the full load of a true coilover without some strengthening work. I also wanted a more comfortable coilover for road use and the occasional track day and ring trip. These have proved faultless and a great coilover, set them up for the stiffness you want on the road and then when at the track within 5 minutes set all four to the stiffness you desire, all adjusters are at the top of the shock making it effortless. The bodies were coated with collinite 476s wax and the threads/adjusters with castrol chain lube to keep everything clean and moving freely before installation. Been on the car about 7k miles and as you can see are still in fantastic condition, very slight surface rust on the rear springs none on the front. Will come in the original box. £400 collected, I will also throw in 2 new cans of wurth 2040 lubricant for when you put them on. I'm happy to deliver any of the above within a 10-15 miles radius from Epsom, Surrey Cheers Arran Edited August 31, 2015 by Arran Quote Link to comment Share on other sites More sharing options...
jimboy2 Posted August 22, 2015 Share Posted August 22, 2015 Dibs on xyz Quote Link to comment Share on other sites More sharing options...
Arran Posted August 22, 2015 Author Share Posted August 22, 2015 Will sort out pictures in a sec something's wrong Quote Link to comment Share on other sites More sharing options...
Arran Posted August 22, 2015 Author Share Posted August 22, 2015 Pictures sorted, James has first dibs on XYZ pipe, cheers for the quick pm fella Quote Link to comment Share on other sites More sharing options...
reeces555 Posted August 22, 2015 Share Posted August 22, 2015 Pm sent Quote Link to comment Share on other sites More sharing options...
Arran Posted August 22, 2015 Author Share Posted August 22, 2015 (edited) PM replied Will also have genuine facelift led rear lights, mocal oil cooler and temperature gauge setup, motordyne plenum spacer and a fair few other bits for sale in the next week or so Here's a video of my exhaust setup, dc sports exhaust manifolds, XYZ with resonator y pipe, art decats and cobra resonated mid and rear (car has a ultra lightweight flywheel in it to) Edited August 22, 2015 by Arran 1 Quote Link to comment Share on other sites More sharing options...
delz0r Posted August 22, 2015 Share Posted August 22, 2015 Are the ART pipes for de or HR ? Quote Link to comment Share on other sites More sharing options...
Arran Posted August 22, 2015 Author Share Posted August 22, 2015 DE fella not sure if they'll fit a HR, might do but can't be 100% Quote Link to comment Share on other sites More sharing options...
delz0r Posted August 22, 2015 Share Posted August 22, 2015 The DE and HR. Versions are different. Was looking for HR. Thanks Quote Link to comment Share on other sites More sharing options...
Arran Posted August 22, 2015 Author Share Posted August 22, 2015 No problems bud Quote Link to comment Share on other sites More sharing options...
Arran Posted August 23, 2015 Author Share Posted August 23, 2015 All PMs replied to Quote Link to comment Share on other sites More sharing options...
jumping350 Posted August 23, 2015 Share Posted August 23, 2015 (edited) Hey Arran did you run two sandwich plates on your oil cooler?? i wondering if it was you who done it, is one of them for sale at all? are you selling up? Edited August 23, 2015 by jumping350 Quote Link to comment Share on other sites More sharing options...
Arran Posted August 23, 2015 Author Share Posted August 23, 2015 Yeah ran one for the temp gauge and one for the lines bro, the whole setup is for sale still looks pretty much new tbh didn't cover a lot of miles and was a godsend on track and spirited road driving, didn't see over 106c at the ring! Selling the car mate yeah Quote Link to comment Share on other sites More sharing options...
Arran Posted August 25, 2015 Author Share Posted August 25, 2015 XYZ sold to Jim HSD provisionally sold ART decats still available Spacers still available Update with new parts tomorrow Quote Link to comment Share on other sites More sharing options...
Bodyboarder81 Posted August 25, 2015 Share Posted August 25, 2015 Somebody get those art pipes .... The best decats you can buy ! 1 Quote Link to comment Share on other sites More sharing options...
Ogman Posted August 26, 2015 Share Posted August 26, 2015 Somebody get those art pipes .... The best decats you can buy ! Yep - 100%. Quality is out of this world, and the sound....well, it's just amazing! Quote Link to comment Share on other sites More sharing options...
Arran Posted August 26, 2015 Author Share Posted August 26, 2015 Agreed I can't believe they haven't gone yet, what they did for my car sound wise was awesome no rasp like normal decats and hfc All PMs replied to Quote Link to comment Share on other sites More sharing options...
r111nxx Posted August 27, 2015 Share Posted August 27, 2015 I'm Interested in the coilovers but any movement on price? I would need delivery too. Thanks a lot. Quote Link to comment Share on other sites More sharing options...
Arran Posted August 27, 2015 Author Share Posted August 27, 2015 Coilovers are sold bud, thank you though Pictures to come but got more coming up this week Black genuine nismo gearknob Genuine carbon rest strut trim Brand new gold DE engine bolt set Number plate reverse camera Horsham earthing kit Brand new oil catch can JDM only centre console twin cup holder Facelift airbox, hks panel filter and black Samco intake pipe Quote Link to comment Share on other sites More sharing options...
r111nxx Posted August 27, 2015 Share Posted August 27, 2015 No worries. Thanks. Quote Link to comment Share on other sites More sharing options...
Jumzo Posted August 27, 2015 Share Posted August 27, 2015 Interested in cup holder and nismo knob Quote Link to comment Share on other sites More sharing options...
Arran Posted August 27, 2015 Author Share Posted August 27, 2015 Gearknob sold already lol cup holder available I will get pictures tonight Quote Link to comment Share on other sites More sharing options...
andy10v Posted August 27, 2015 Share Posted August 27, 2015 How much for the oil cooler setup if its still available? Does it have a thermostat? Quote Link to comment Share on other sites More sharing options...
Arran Posted August 27, 2015 Author Share Posted August 27, 2015 hi andy the oil cooler is still available, it does have a thermostat that opens at 85c, I wouldnt run one without on the road. the cooler is a mocal 13row, aeroquip blue socketless hose,aeroquip blue and red fitting, r spec temp sensor sandwhich plate, mocal thermostatic plate, pro sport led temp gauge with custom pod a pillar its a proper kit no cheap parts on a vital component, only thing you'd need is the 2 mocal mounts from merlin motorsport 7 pounds its up for 400 which is alot cheaper than what it cost me not very long ago, i have pictures if you want to pm me cheers Quote Link to comment Share on other sites More sharing options...
andy10v Posted August 27, 2015 Share Posted August 27, 2015 Thanks for the quick reply, not quite what I am looking for, thanks though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.