3FIDDYZ

Decats can loose power on N/A Kenitix V+ arnt really worth it (And you have to use an ugly strut bar!), just get a spacer Pully's, few have had issues, some havnt....

Xendric, I do appriciate your side and I do think you have given them enough chances. It has been discussed many times on both forums about traders taking time to come back and if we ran our business's with the same amount of communication very few of us would be in business... We have discussed how to contact the traders (This is all traders, not just Envy), PM's were discussed as being the worst way, emails being the next and phone being the best... As we know most of the traders arnt direct importers / distributers of the kit so they have to get intouch with other people, esp in Japan and this takes time for answers, but again I am only putting forward my opinion, and not condoning no responces when they dont have an answer... The should be keeping you in the picture. Esp when business is hard to come by!! If its going to take 3 months to get then at least you know your going to be waiting that long... As I said in the post earlier and getting back on topic, dan is the man to talk to about the chargespeed rear and he should be able to tell you when, where and how much... Mark

He won an award at the MTV europe awards based on voting... Not sure how many that voted for free will pay!! I like the line "even if you already own it" !!! Rick must be making more now than he did back in the 80's!!

Led's in brake lights, leds for indicators and side lights in the sidemarkers in the front bumper and front lights from clearcorners to be fitted soon... It was a very well priced job but your best speaking to Big John as prices can change depending on the work needed, but it was a bit south of a grand

Mate... The turn around time I almost feel like I am rubbing it in.... But yep, paint looks great, car is outside now and have been over it a few times looking for imperfections and cant seem to see any... but its still grey skys... Appriciate the compliments

Rear will just get an import plate. I was going to stick it on, but I want to be able to have a silver / black plate too so was going to make it so I could flip it over for shows.... Front....? Not sure at the moment...... Need to get somethign sorted soon though!

Thanks but I can only hope that comes out looking as good as yours. I really like what you have done, its looks very very clean. If I may add a suggestion, a set of '06 Bi-xenon headlights would look killer on your car. In due time I am sure since you have other priorities. I do have a little something to fit from Mike in the states just had a few issues with the wiring at the moment!!

Car is a blade silver Sarnie so hope they havnt used GM!! Its a blackberry camera so its the light.. Looked spot on in the flesh! Rear wheel spacers? They are right on the arch as they are! Well perhaps 0.5cm back... Its prob the camber thats making that look like that, cambers will be sorted soon!

Tap is sorted chris and what looks like a specific outside washing area with hoses etc.... The house has a "motor racing" theme name and there are 3 garages with the house... I only get to use the carport though.... but dying to have a peek in the garages though!!

Will have soon, just waiting for a bit of kenwood kit to turn up and that bit will be sorted! Cool screen on yours mate

Guessing its the same as the dashdaq http://www.hksusa.com/info/?id=3474 but as it fits with the f-con you will always get more info if you need it!

No rivets on mine Clarkie Not sure what he used though!

piece of p155 for the install esp if you have a red/white/yellow input spare... Plug that in your screen, plug the odbII port in and your good to go. no power needed for the Camp2 as its powered from the odbII Got it from Adam in the states Was a pressie so not sure on the cost!

Am running the HKS camp2 in mine at the moment, not all hooked up to the 2nd screen yet, but if you already have a double dinn screen it makes for a cleaner install

Looking forward to seeing what you and Adam have done to your Zed in the states Kwame Been keping an eye on your posts in the US!!

Yeh, thought about the wood!! Just using the putter to try and workout what I would need to build to get me over the peskie hump! will drive down tomorrow and give it a go! very carefully! And if I get out to measure I have to remember that it will be lower with me in it! Am thinking a couple of scaffold planks chopped in 1/2 left close by will sort it! Luckly not buying at the moment so no major work to do!!!. Got a flat I am not selling and my other 1/2 has just sold hers so renting for a bit and waiting to see what the market does.. better to buy in an upward market rather than a downward one!

Tell me about it!! I got it in the neck for having to be there for 1pm and wasting valuable house hunting time.... and then for not collecting it!! There were chunters of "having a stupid low car"... Funny enough, the decisions on the house have been slightly based on will the car get up the drive... is there a garage??? Is there an outside hose? Found a house now.... Offer been excepted, although one slight hitch on the small private road that leads up to it... There is a small but slightly high speed bump... I am thinking I may have to get a small amount of tarmac out! Or make something up that is removable! Only 2 houses on the road, just need to check who put the hump in!

IIRC the strut is still there but its been redesigned and its now "inverse"

Well dropped the car off with Big John @ JPC Auto refinishing in Cranleigh on Monday afternoon and it was ready to collect yesterday but unfortunately I was too busy house hunting... Went over at Lunchtime to collect but due to the rain round here Johns place looked like it had a moat round it and no draw bridge! So saw the car and paid him but will go and collect tommorow... Got a couple of bad pics due to the weather but at least you get the idea! Paint is brilliant, kit has an amazing fit (John said it was one of the best he had done) great service from all concerned. Big thanks for John for sorting (he had almost as big a grin as I had when I picked it up! And not cause I was giving him the folding! Just cause the way it looked!) Big thanks to Dan from SRB Power for arranging, Great service and thanks for the sponsorship, see you at the shows in '09. And big thanks to Kev and Gaz at Envy for providing almost all the other bits including the new Ings rear spoiler and AeroSync latches. Top work fellas. More pics to follow when the suns out and the final touches are made.... Enjoy (or not as not everyone will like !!! )

Well every side has a story.... And just to make sure that both sides are seen... Envy have to go to SRB to get the kit, so perhaps they are waiting for someone to go back to them... I have made about 20 transactions with Envy over the past year, all the big stuff, wheels, suspension, exhaust system, 5zigen parts, ings stuff and have never had one issue with them. Both Gaz and Kev have been 100%... I bought a strut bar off another trader (not envy) on here that was powdercoated, I know that Kev supplied the item to the other trader.. There has been a problem with the powdercoating and without asking Envy offered to redo the powdercoating... The other trader hasnt.... They are main dealers and distributers for lots of top end equipment and have a very good name around the forums on both 350's and Supras.... If you have had an issue, then say so and give them chance to answer the problem in public...

Agree with what you saying alex on the commercial value as they have a chance of getting damaged in transit... You know what the private sellers in the US are like about shipping abroad.... You may as well ask them to ship to mars! "What your in the UK?? Really? Wow... Didnt think they had cars in the UK, arnt you guys riding round in Horse and Carts?"

Will be there between 7 and 8pm but just so your aware its another club meet

its not the day time one, its later on.....

You look to be way off on the positioning mate.... it will make a difference if you line it up right... Also it needs to be pressed down well. If your using the double sided tape you may want to go with no nails as you will be able to move it about to get the fit right before it sets. Where did you get it?

Not till tomorrow after the Ace Cafe meet! Only cause I didnt have time to go pick her up today!