zxrjohn14

Awesome I'll pm you my number and if you're around Bourne, pop in for a brew

i may have a go. I'm quite a "right let's do this sh!t" kinda guy, but am always willing to help. If anyone ever wants any help in my area (Bourne, Lincolnshire), i can always assist and lend my small bit of knowledge and hands.

Probably £60-£80 ish A friend in our area charges £40 per hour and this loom is only 4 wires really.

The charger is from a Toyota and is a similar shape. I removed the plastic from the switch housing just leaving the clip tangs and put a small cable tie around the tangs. The hooks are just in the right place to hold the bottom of the switch and hold it nice and tight against the top, the wiring got put to a switched live on the stereo.

All i did to get the seats in and change the position was temporarily put 2 wires with spade connectors on from the cigarette lighter. I'm sure everyone has a spare phone charger or something they can cut up. Just take the resistor out and bridge it so you get 12v. The spade connectors​ go to red 12v and green earth on the seat... I will confirm this later by looking at my plug under the seat

Thank you all. It arrived 13th February and I've been working on it most weekends, some evenings and a few days off work here and there. I've checked all of the car over to make sure everything is ok on it. It does seem to be a very well looked after car and has benefited from a recent service by the looks of it.

As a few of you know, i was after a 350z project and bought a nice example from eBay for £2150 delivered to my door. It was a crashed, Cat C car and a JDM import. I am waiting for the guy i bought it from to send me the pictures, as stupidly, i was that excited i never took any pictures of it with all the broken bodywork on Anyway....this is it mid strip The damage was: Wing bumper wheel wheel assembly nudge bar headlight radiator surround wheel liner headlight frame for fun, i fitted: leather interior and built my own loom for the heat and electrics fitted a full Bose system (i think it's awesome!!) fitted a UK pod for MPH and MPG fitted a USB charger carbon wrapped the centre console wheel before wheel after i bought a 20" damaged wheel from Shpock for a fiver, cut a good piece out to the shape and size required, cut the damage out of the original the same shape and TIG welded away!! this was a project to keep my mind occupied and have somethink nice to play with once done. I normally build motorbikes to occupy my mind but a 350z is an itch that needed scratching since they come out. i've done all the work on this myself, including the spraying, which i think, has come out remarkably well for doing it in the shed Today i took it for an MOT and it passed, i am so happy i'd like to say a massive thank you to Jon at Emporer for his help advice and supplying some of the bits for my build the things left to do are: wheel refurb make the sill skirt up where its broken excuse the halo effect on some of the pictures, this is because i dropped my phone and cracked all of the glass around the camera lens

No wiring on my 2002 JDM either. I swapped to leather and got the seats and heaters working by building my own loom with relays etc as shown on the schematic drawing in the manual.

I think the torches idea would be very cost effective

Have you contacted jon@emporer?

A couple of good torches is what you need.

Ask jon@emporer on here. And he's in Cambridge.

Has anyone got any lurking on a shelf? I need 1-1.5 litres including thinners, so half to a litre of actual paint. Thank you

Payco, i know exactly what you mean and how you feel.

Thank you, stevoD. An absolute pleasure to meet you and thank you very much for the money If you require anything tomorrow at Rockingham, give me a shout and I'll pop it over.

I have one and am in Bourne Lincolnshire.

What sort of wheels are these? As in the maker and model name?

any good, Simon??

a massive thank you to Davy (ebsop) for taking the time to send me the manual. this will be so helpful with my project.

Googled it and tried to download, but they don't. And I really don't want to take a survey and give my email address.

Hopefully Simon will have them. He's not given me a yes or no yet.

Measurements, pictures sent your email address.

I have a pair to sell. PM inbound

I might be able to mould one from the one I have and sell that.