Willsy1980

Depending on age and service history, it make still be covered under Nissan's corrosion warranty.

On 09/09/2024 at 18:30, ballistic said:

surely a De-cat is needed?

Isn't that a Shotgun ? Spread the cat more than it spread its Pee 😆

+1 on the Hawks 👍

Could it not just be vapor from the breather ? 

Full tank on hot days it could be venting pressue 👍

Loads of work gone into this, looking superb 👌 

BTW if you want a rad core cover let me know, would look great in white to keep with your coulor theme 😉

Ouch! Hopefully you collected the Deer and took it with you, make some good BBQ that, pre-tenderised too 😆

On 22/07/2024 at 04:26, Loadmaster said:

Morning, I wasn't sure who you were even if I could find you, plus there were a good few white Nismos there. Driving out at about 15:30 I saw V6 LCD, was that you?

 

 

No AP19 XHT I was parked right outside the doors to Torqen beside their demo car  

On 24/06/2024 at 12:26, Loadmaster said:

Can you bring one along to the Torqen meet in July for myself and others to take a look at?

Was there today, sold one in Black. Only person who came over. 

Bob has one on his and one on his wifes too.

Hopefully you saw it on mine, happy to refund if not 100% happy too 👍

Yeah ill be heading down again 👍

Also, anyone interested, I have produced some rad core covers, these are available for £50 plus £5 p+p includes countersunk bolts, red CS washers and captive nuts for fitting.

I can also get them painted in semi gloss black for an extra £10 (other colours on request)

How they look plain:

Been way too long again since I added anything to this, so....

The current look

Ahh you don't have a financial controller, I mean wife, to justify spending to then 😆

Never worry about man maths. If her indoors finds out how much you spent. Its easier to beg for forgivness than ask for permission  

Mine have arrived 👍

I hadnt actually looked into them, but id be looking for alternatives to those. Unless you want to drop £6K on them 😄 Can buy another Z for that 😆

On 03/01/2024 at 23:05, ShortPaul said:

I am storing my zed in a garage 

Garage ??

That lucky little princess seems to have a little Bungalo. Just needs some decking and a BBQ she can host lovely summer get togethers 😆

On 31/12/2023 at 12:10, AssaTM said:

Hi all,

 

I have tried googling this but it's either out of date information or so widely diluted it's impossible to find a useful answer - what OBD2 hardware/software does everyone recommend for the car please? Thank you.

Just for basic codes reads and resets, this one works fine on my 2019 Nismo 👍

https://www.amazon.co.uk/Foseal-Reader-Scanner-Display-Screen/dp/B07RQCP5PY/ref=sr_1_8?crid=XK74KULRBPV2&keywords=odb2%2Bscanner&qid=1704137344&sprefix=odb%2Caps%2C90&sr=8-8&th=1

On 30/12/2023 at 10:45, Jinshim said:

Why'd you said that then because now it's in my bloody head 😂 

Welcome back, lovely looking Z

Agree with the bronze and black combo, very nice 👌

If you feel like buying a v2 nismo wing for it, let me know 😆

Personally, if using OEM pistons then i'd use OEM rings. You really don't want to be rebuilding it twice for the sake of rings. Or just buy the Wiseco piston and ring set, more cost but at least you know its right 1st time 👍

On 27/12/2023 at 17:57, Stutopia said:

Anyone else before I make the order?

Can you make mine an x2 as below   

1. Stutopia x2

2. andy James x1

3. Willsy x2

4. HEADPHONES x1

5. Rodgeevans x1

6. KevT x1

7. Harrison140 x1

8. Loadmaster x1

9. Matay20

10. Woodzman x1

11. PlanGT x1

12. Daveo132 x1

13. Lyndzzz x1

14. Ben350 x1.

Even though its been 3 yrs if they are only just out of cover, i'd bet if you contact Mori they would likely help out 👍

Not nipped a line anywhere have you ? Id get it in the air and have a good look around for any signs of kinks, crush or leaks 👍

Found this: https://www.nissanpartsdeal.com/parts-list/2007-nissan-350z/fuel_engine_control/fuel_piping.html?diagram=173_A003

Has the routing and part numbers if needed 

14 hours ago, Umster said:

I've learned that if you can't afford 5 tyres comfortably, go down the price point until you can. Sods law is you'll buy 4 new tyres and get a nail in 1 a few weeks in.

Just not too far down, unless you can afford to replace the car after you stick it in a tree 🤣

On 24/11/2023 at 13:21, McG said:

Got mine installed today. To anyone due to get 1, once you remove the protective wrap that’s  been applied to prevent scratching, give it a wipe with an isopropyl alcohol or similar to remove any glue residue from the wrap. 
 
Another thing to note is the overflow pipe is a very tight fit to get back on. 
 

If you have trouble with the overflow length, just get an inline pipe connector and short length of hose and extend it. Its not under pressure so all safe to do. Had to do it with mine when fitting aftermarket hose kit 👍