FallenAngelX

An update to this. The engine has been Terra cleaned New oil sensor has been put in Oil filter has been cleaned and so has the oil pan Issue still persists. Gauge is showing increasing oil pressure relative to rpm but it's sat low. 2k revs pulls around 25psi A oil pump and timing chain has been suggested but isn't guaranteed to fix the issue, but the labour will cost a good amount. Not sure where to go from here

@ GMballistic Yes those are the ones, im using a 10mm socket. I can literally see the spirenuts spinning around as i try to unscrew them. I will apply some WD40 to the screwheads and see how it goes Thank you!

Got a set of DRL reflectors from tarmac sports. Im having a major issue with the front bumper Using a 10mm socket ALL 6 of the screws just keep on twisting, never getting any looser. Any ideas guys? Cheers

The same ones i linked above with the smoked finish cover instead? Do you have any pictures Thank you

Only thing that is concerning me on these ebay sets is warranty. Dont want to buy them then they die out after a few weeks

Hey all, so currently in the process of modernizing the lighting on the Z. In terms of the rear Led lights i feel like i have 2 options. OEM 2006+ LED's Click the spoiler to view images or Aftermarket plug and play(i think) Led tail lights http://www.ebay.co.u...U0oJGAstIej7v9w Pictures of these from a member on here While i do like the look of the OEM, i actually prefer the after market LED's look due to there being more leds in the same space. Is there anything here im overlooking? Has anyone else tried these Thank you

Just checked, level is fine, just below max. The oil utilised is 5w30

Hey all, car has recently been serviced 500 miles ago ish. Oil will have been done. On idle if I'm say stopped at lights the low oil pressure light will flash up then goes when I start driving. On watching the gauge at idle pressure is barely above 0, it raises relative to rpm, max I usually see is 60 ish. How accurate is the oil pressure gauge? Should I have this looked at? Cheers

Managed to get it off. In terms of sealent is this necessary with the 25mm grommet. If so how much should be applied

Hey all currently performing the rear wiper delete as per the guidelines on this forum. I have successfully removed the wiper cover and nut. But the arm will not come off at all Any advice on what I should do Thank you

Payment Sent for the DE's aswell

Whats the best way to remedy this. Rays look all shiny, so do the brembo discs. Then these are just sat in between looking like @*!# lol

Will take a set of these too. Payment inbound De carbon effect £65:

Payment Sent for 2

Hopefully this doesnt seem like a stupid question I want to perform the 350z wiper delete mod. Does this need to be declared to my insurance company? Thank you

Hey all, relatively new to this forum but had my Z for a while. I have 2 questions that i would really appreciate some help with before i proceed further 1. I have a 2003 350z, the front headlight has an orange reflector. Will removing this have any detrimental / negative effect in terms of the amount of light that is output from the headlight, or the way it is reflected? 2. I want DRL's but am not a fan of the side reflector mod, i actually want them in the headlight. Obviously the headlight has to be opened and resealed, resealing seems to be the most important thing. Is there anything i am missing, would it be as simple as obtaining the relevant LED strips, adhesiving them in the light, and wiring up? Thank you Examples of the kind of DRL i am after below http://www.ebay.co.uk/itm/2x-60CM-FLEXIBLE-TUBE-White-Amber-Car-Headlight-LED-Strip-DRL-Daytime-Run-Lights-/311403776359?hash=item48811c8967:g:x-4AAOSwyQtVp5aW

Anymore pictures of these at different angles? How do these look straight from the front? as the leds appear to be at a angle in the pictures Thanks

Are these still available? If so are they the same as the ones seen in the picture below? Thanks!