cascade88

Update dougie?

Good job on moving it. Where is this one from?

What was up with the isr? I have one with the middle box removed, so is just the backbox silencer same as agency power...

Provisionally sold

camber arm bolt has no nut / head?

Been on the car for around 10k, washed and oiled about 2k ago. Comes with heat shield as pictured, all straight and no damage. One of the rubber strips / seals on the top of the heat shield has lifted slightly but would imagine gluing back on if fussy wouldn't be an issue, most probably wouldn't have mentioned it. Looking for £80 inc mainland uk postage, buyer to cover PayPal fees.

Scroll to find mark @ abbey ms post http://www.350z-uk.com/topic/102863-oil-temperature-gauge/

5x114 Nissan 1.25 thread pitch pair of 15mm hubcentric spacers wanted.

Thank you. Does it come with the gasket? If not, is it reusable?

DE thermostat price?

Bump

These would look great, set alight. In my opinion of course.

Put them on eBay Some for sale cars I've seen unfortunately do have mods like this, so there's a market for those souls.

After a pair of rota gtr-d in 5x114 10j fitment Any colour or condition cheaper the better

8j are the tourings, et30 so exact same as the rays I believe. The touring clear front and back Brembos as they're stock fitment (rays were optional) So no probs.

I have some stock 18" (not the rays) A pair with skid tyres (may be just legal) In black with some scuff to the paint but are true and not buckled if you wanted to run them on road. Think they're 235/40 tyres but can check, could also remove them if not needed. I may have a set of these but I haven't decided if to sell them all just yet, definitely let a pair go for £100 Or if you wanted something different I have a pair of 9j xxr968 et20 in black with 215/40 tyres that I am looking at selling. £200

I have done this myself as was too quiet before. It is more raspy but also louder, much better for my taste. Would get a vid but cars not with me at the mo. If you check YouTube though there's a guy that put vids up before and after removing the centre silencer.

Also having skim read above I wouldn't advise fitting a T to the pressure sender Instead if you search there's a good post on here about a tap in the block that's got a bolt in it for the DE models that actually has a temp sensor in the rev up and hr models and is sent to the ecu.

Not read any of the other posts as i can't be arsed But from my experience (first drift day) I have fitted an oil temp gauge and saw over 120c after a short while and it wasn't a warm day Promptly changed the oil to Fuchs titan (ester can hold higher temps longer) and fitted a 23 row oil cooler, since then I've only hit 120c no more and it soon cools. Only issue aside from that is road driving doesn't get that hot and I have a 90c thermo. Will personally want to block the core when it's winter unles thrashing it

Could be interested in a set but ideally after a pair of 9.5j in either xt206 or xt006, any colour but ideally bronze.

Everything still available although may end up keeping the rota caps.

I have a single one, got it in the for sale section with some other bits and bobs

Cleared out a locker and found some bits seemed too good to throw out. All items are in the one picture below: Heated seat bracket with switches fully working exactly as pictured, included the metal support as well. £12 posted. Rota high top black centre caps x2, Both are brand new I think didn't use them only fit, I broke the clips on one of them trying to fit when I had a spacer on, so you'll need to glue/silicone/whatever that one on, but the other is perfect. £12 posted 1x camber / toe standard adjustment bolt, the other snapped when removing but this one is good. £7 posted Steering wheel standard DE silver bezel / surround for the cruise control. I removed the cruise switches so don't have them but this surround is solid, has usual marks would need a clean up or refurb. £7 posted Lastly, I had some aluminium (5mm thick) laser cut into square washers for use on the rear subframe same as spl etc 'lockout washers'. They aren't the prettiest cuts but work fine have them fitted on my own. You'll need bolts but they're actually available on eBay for cheap that are perfect size. £7 posted for 4 (full set)

Is that an Ings rear bumper or another brand rep?

'This is what we recommend' IMO brake, clutch and power steering fluid should be included too.