mrkieran23

I considered this but ruled it out due to only doing it with mild acceleration, if it were this i would think it would be more pronounced the slower i went ---- would love this to be what it is though

So i own a 54 350, done 43k. Recently i notice that some times i get a grinding noise coming from front of the car at low revs with mild acceleration. Its hard to explain but i hear the nice engine nice engine growl but i also hear and feel a grinding noise, happens with mild acceleration 1st, 2nd n 3rd, not tried other gears, its hard to explain and i doubt my phone would pick up the noise, it still has warrenty so will call dealer about it but would like to be armed with some info. i know typically they say the trans on these are noisy but this doesnt feel like its normal as its only just started, last couple week. I prob only drive the car 30ish miles a week. all thoughts and comments welcome.

Really like this thread so far

well im based close to the city center in a place called calrton if anybody is close. I did see a silver 04 zed today off carlton road me thinks

the only image i have of my garage was when working on the coupe i had, little messy

So i did get the zed on the dyno at modified nationals, more to see and hear her roar. The results was 266hp at the fly with 259 lb/ft

Was a great show as always, only stayed the Sat as saw the rain on the sunday. Saw few Zeds looking nice

Would be up for a meet be good to meet some fell Zed owners.

Well everything else seems to be working

Had some more look and found festoon bulb with heat shield on the back advised Everything seems to be in order though so

I hope not. replaced bulb, work ok

I'm a Nottingham zed but not mentioned above

So as the above says, put some led festoon bulbs in and I heard a pop and the light went, while searching for the fuse box I caught the indicator which also didn't work.... I got worried. Found the fuse box and there was 10amp fuse gone, replaced it with a spare and indicators now work but the dome lights only work when pressed, not auto when the door opens. Anybody ideas?

Oh no don't get me wrong... the things i can remove i will be sending to them that's a given, its more the side of the engine behind the pulleys that ill do myself, things like the intake and bonnet catch, ill have them sent off to the pro's

The picture above is the reason for my thread. I have actually saved your picture because its what i want to be doing with my bay including that wire cover you have. I wont be getting much hydro dipped as its becoming real common now so think i'm going with a mirror finish. When you say dremel, what attachment? sand? disc, stone How do you keep it shiny and from going rusty?

Hey guys, so i have decided how i want my bay to look, and it looks like its the same as most. I wont be doing the intake myself but there are parts i cannot really get sent off to do, engine side under the cover behind the belts. I could like to give that the mirror finish like most...... i'm curious to how. Is this a case of different grades of sand paper? tips appreciated guys

Beautifu looking motor That Dyno was a good reading ha

more little light mods Number plate lights And yea, i went and did it. Valve caps

I thought as much from the term HUB Dyno but didnt want to assume it ha. Well now i know lol. Cheer guys

Sorry ha perhaps not the term, do you mean wheels off and bolt to the hub? The one at the show is a rolling road

I'm not sure what a hub dyno is

Just over the years from watching at shows and a fair few videos on youtube (i'll have a search later) Main reason is a lot of the time they're doing it to show off to the crowed - I.e. keeping it running longer than needed. But from video's I've watched so many times have they not been strapped down correctly etc and come off the rails You mean things like this

really? lol how come? i'm curious

this is what i have read. Want to put the car on the dyno, get a figure but also see and hear her on the dyno but if they use only 3rd when i know they should use 4th for a better read. mmmmmmmm

Its completely standard, want to see what I have currently have n want to see it on the dyno