bytespc

Hmmm most fm stations are fineish its mainly radio 2....

Its the standard one I think having not got one to compare with...its radio 2 thats the problem....

OK...having a GT pack car and the Bose...shudder...damn thing has never worked right and yes I have read all about the fixes etc etc Question is the radio reception really this bad unless you change the aerial ?

Saw two black 350s leaving wittering yesterday in my black 350 it was a bit like the twilight zone

Definitely not in my head more like the seat if my pants. Definite improvement, which I could find the tire load / size / pressure info as its a deffo read imho

245/30/20 on the front and 275/30/20 on the rear should of mentioned that also there was a post somewhere ( cant find it ) about how larger sizes and lower profiles need higher pressures

An odd title I know but bear with me: As some of you know I am two months into Z ownership and have just ( two weeks ago ) had my rears replaced and made a post reference new tyres and wet roundabouts , well the rears are now well bedded in and to be honest I haven't been over impressed with the handling.....so last night when the temp finally dropped from fry me an egg to warm beer I re-checked my front and rear tyre pressures: The rears where spot on 37psi and the fronts 38 one side and 37 the other now colour me purple but I went out on a limb and inflated the 37 to 38psi, this morning I have just enjoyed a most spirited country lane blast where for the first time since ownership I felt I could really lean on the car, I'm still smiling now an hour and a half later. Question : anyone else run higher psi in the front ?

Thought it was already sorted as per the following Sizer Way Dibden Southampton Hampshire SO45 5JA England 9 am please, that will give us time to collect the late comers. Before setting off in convoy for around 10 minutes to reach the final way point.

Bought ours , there e tickets so just print them off

I like that a smart answer obliquely referring to the 350's published torque range.. Have a gold star that man

Burnouts are not the solution to all worldly ills..... Now repeat after me... I will not dump the clutch on the red line Come on..... I will nit dump the clutch on the red line

Masochist

Don't mix.......nuf said Heart / Mouth / Change Of Underwear

Worthing you say....its not far, Super7 you have there address or Ill just google em. Thanks

Billy no mates me..... Only been here10 years so its early yet ?

Alas local indies wont touch under sealing even my local paint shop has stopped doing it so it will have to be ?

Nice replies there peeps....black boggies...eugh...anywho being a disabled Zed owner that is not an option

As per the thread title does anyone know of a reputable undersealer type person in West Sussex ?

Not a question of need its a question of want......lol, the old tyres had a pronounced step / stretched look and tbh looked odd the new tyres look much better but the 285's would fill the wheel better hence the original question

For those whose asked and for my peace of mind the following is the information we all needed : 20" obviously 10.5J Unexpected ET30 No spacers are fitted Tyres have been replaced by a like size but for my now peaked interest could I have fitted 285/30/20 Thanks to all who have participated in this thread

It did...will provide all relevant info when wheels are removed.

Interesting you felt the need for spacers are you running 9.5's or 10's then ?, I've read that with 10's or 10.5's you don't need spacers on the rears to clear the Brembo's.

The garage is sourcing the same size tyres as are currently fitted I will ask them to make a note of the specifications when they remove the worn tyres. Thanks

Alas not having purchased the wheels I have no idea wheather they are 10 or10.5 I thought someone on this site was running the same wheels ?

Finichi Firenze 20" The 275/30/20 fitted have a slight stretched look, checking the size calculator it says I should have 285/30/20 on my question is does anyone run the larger size and do thdy rub ?