Jump to content

gstraw

Members
  • Posts

    721
  • Joined

  • Last visited

Posts posted by gstraw

  1. Thanks for the replies

    So is a GPS and laser system the best then? One that doesn't detect radar so it reduces the likihood of false readings if shops use radar a lot? I can use the gps part to find fixed cameras and laser to detect mobile speed traps?

    Most of the radar ones I've seen have a city setting.

    What do traffic cops use when they have that big cylinder propped on the roof of their cars pointing backwards?

    Thanks

     

  2. 25mm all around. At least if you keep it square any adverse effects shouldn't be an issue since you've increased the track on both front and back by same amount.

    I've got 25mm all around and it looks great. I went for eibach. Great quality. Last spacers I used were made from a machine shop and the loctite wasn't great

    • Like 1
  3. It is deffo green and white. It's in the loom on the right hand side of the boot as you look into it. I have a couple of pix but they don't show it too clearly. I think you have to peel the wrapping off the loom to get to the wires. :)

     

    yeah thats the wires that I peeled back. i'll check again. do you have the 09 model? non touch screen?

  4. Hey

    Does anyone know for sure which wire is the reverse light? I can't see a green/white wire.

    I'm gonna wire the camera to the cig lighter then wire the reverse wire on the navtool to the reverse wire which is one of the wires in the boot

     

    Iwan where did you connect the reverse wire on your pioneer to?

     

     

     

    Sent from my iPhone using Tapatalk

  5. Hey all.

     

    Really need some help with my reverse camera. I've got a 2009 car so I have the standard connect system. I bought the navtool and also got the Y cable modified. The navtool sees power whic is good.

    Issue is I don't understand how to wire the actual camera up. I was advised to take a splice off the Orange cable in the boot since this is the reverse light signal. Where does this splice go? I wired it to the red wire of the camera and the black t ground but it doesn't seem to work.

     

    Can anyone help? Thinking maybe Octet if he reads this.

    Thanks

×
×
  • Create New...