-
Posts
1,237 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Jp606
-
-
Yes sure you can! Which one do you want? We have a choice
The green s-tech coil, same as what's on my car
-
Wtf!!
-
Abbey is the only place you should go in this area if you want it done properly.
-
1
-
-
Oh my god I want one of those s-tech key rings! Can I buy one?
-
Great service as always. Identified the correct sensor for a P0340 fault and promptly had it in the post and more importantly, it fixed the problem
thanks a lot!
-
2
-
-
It's a no brainier, the Z is a much better all round car IMO, you're getting a lot of car for the money.
-
Anyone on here? Looked slightly modded and noticed it had a black/carbon fuel filler flap.
-
Normal, it's the exhaust cam timing. An UpRev remap cures it, as well as making the car 100% more fun to drive.
No just a software remap sorts it, no risk of engine damage or anything like that, you tend to improve the efficiency of it too.
-
-
-
-
Best thing for the exhaust is to go to some meets, or find Zed owners in your area with the setup you want and listen to them in person, videos on YouTube don't really sound anything like they do in person.
-
How do you know they are money laundering?
-
I personally wouldn't bother with the damper, or the pulleys and I'd leave the clutch until it actually needs replacing. If I was going FI then I'd upgrade the clutch first.
I disagree about the clutch. A lightened flywheel makes a noticeable difference to the engine pick-up and IMO is a big improvement to the feel of how the car drives.
Fair enough
I guess what I mean is I'd rather spend the money on upgrading other bits first, only replacing the clutch if necessary. I haven't replaced mine so don't have any experience of what difference a lightened flywheel makes, but it makes sense that it'd improve the feel.
-
As you are upgrading the brake lines to SS ones, I'd also go for upgraded discs and pads and of course a decent fluid, such as Motul RBF600.
I'd look at suspension tweaks too, the best thing I did to my Z was change the ARBs to Eibach ARBs + decent drop links, add stiffer suspension springs and get a proper alignment setup done (at Abbey Motorsport). Obviously good tyres too. This massively improves the handling of the car and how you can utilise the extra power from a remap etc.
I personally wouldn't bother with the damper, or the pulleys and I'd leave the clutch until it actually needs replacing. If I was going FI then I'd upgrade the clutch first.
If you're looking for the best gains then the stock air box + filter panel/decats/upgraded exhaust seems to be the best proven method and in your case a spacer on the earlier models. A few people go for headers but they are tricky to fit and quite expensive for relatively little gains, imo.
-
It's a Cobra.
-
Cool pics.
Is your friend any relation to Kamui?
-
Someone asked me if it was an Aston Martin the other day..
-
Get an UpRev remap, you'll get an increase in power and torque and also switchable throttle response via the cruise control buttons, which is all that a D1 controller does anyway.
-
Out of them two, definitely the 997.
-
We went there on our honeymoon back in 2008 we stayed on bandos
We had one of their beach Jacuzzi villas, was amazing.
This.
We have also been here and stayed in the same villas, really nice relaxing place.
-
Top service as usual from Ewen, another faultless order
-
1
-
-
Second hand OEM replacement or a Milltek is pretty quiet.
-
I keep meaning to post a mini review of the Halfords cover. My car lives in the street; it's not a busy road but the Nismo gets so much attention I started worrying it could attract the wrong sort of attention (e.g drunk idiot late at night with key sort of attention). I also got sick of spending hours cleaning the previous 370s and them being mucky again in half an hour, so I gave the Halfords cover a try when I got the Nismo - Large size fits it well.
I had a debate with my other half, as she reckoned it might increase the attention. In fact, it's been the exact opposite - nobody ever looks twice at it and there's no sign that anyone has ever tried to lift the cover. I also love being able to wash the car, cover it and have it nice and clean next time I want to drive it. As long as you make sure the car is clean before the cover goes on you should have no problem with the paintwork - I've been using it for six months now and have seen no evidence of it marring the paintwork. I had to make a window for the tax disc and resident's permit - bought some clear vinyl off Amazon and sewed it in.
As Coldel says, it doesn't take long to get used to putting it on. The plastic buckles on the Halfords cover are a bit rubbish so I just cut them off and use what's left of the straps to tie around the alloy spokes - works perfectly.
I would always use a cover now, even if we had off street parking - it was £50 well spent, even if you end up replacing them after a year or so.
Is that on inside out? Had a green Halfords cover on previous cars, found it trapped moisture under it. Which I believe isn't good for paintwork. Used a separate sheet under the cover to kind of soak it up.
No it's the correct way. It's a breathable 3 layered waterproof one so you won't get any of that.
Edited.
in Off Topic Discussion
Posted
Cake