Vlad

Oh yea, I remembered now...I think Tarmac sells them? Not sure if they are for 350 or 370 though.

interested to know as well

Don't have one of them yet, but have few pics Also probably will need a new clutch in near future lol

Wow! What an update! Fair play to you all and it definitely will be worth it when its done!

ah ok, sorry, my bad

They are quite bulky parts, so if you got space to store them, then keep it. If not, then get rid of.

You can seep them now and if in future you decide to put it back to oem for any reason, you could always buy oem stuff back for same price or even cheaper, as it will be a bit older by then. Especially if it's being wrapped, it's gonna be different colour, so you have to either remove wrap or wrap oem bits.

Good start!

Regarding dyno... It will show the same as ECU "adopts" all mods and cancels them. It only will change after you remap it

I'm booked for 18th. Will take a vid then

Haven't tried it, but whats the point for £130?

Spend a little bit more and get a new decent double din unit that will be so much better than a standard BOSE unit.

My opinion anyway

I will try to do one before and after

I'm booked in for middle of August for pops and bangs. Will take a video after

I have a roof lining and passenger side washer bottle. I'm in Leamington Spa, Cv32

Was good to me you another day mate. Car looked great!

I want lol

That don't answer my question lol

I guess no matter how much it is - if you don't solve underlying issue, you will keep getting DTV with all new discs and end up spending more money.

...like me haha

I'm on like 3rd set now and after some time I start getting vibrations when I brake from 60mph+. So will be visiting this place once I'm about to change my brakes again to sort out underlying issue.

For the price I guess messaging them direct will be best option, as it will depend on what needs doing.

Anybody on here?

Was looking at one of the houses for sale just around the corner and spotted you parked up on the drive/by the garage, when I was turning around.

Could be neighbours soon

Just make sure you do all the mods prior to uprev!!! Its not worth doing otherwise!!

It is worth doing without mods, just won't see as much gains as with mods.

And will have to map it again after mods are fitted.

So yea, if you're planning to do any mods (air intake, exhaust/de-cats, plenum spacer etc) do it before remap to save on a 2nd remap/cost.

Bad idle or engine shutting off etc. Refit it all and star up the car. If idles fine, give it few little revs...if thats ok, then take it for a little spin by the house - if drives ok, then you're lucky lol if not, you can buy used OEM MAF quite cheap.

Thanks everyone. Sounds like too much trouble straight away to make it look like I want it, so probably will give it a miss

Here's floor plan of the 1st floor

Yea, owners said its all been done properly and complies with building reg etc.

Thanks all for the replies, much much appreciated.

Yea, looking at the picture of the house (below) it looks like it is an external wall, which carries on up when garage/dining room roof finishes, if that makes sense?

Ah well, I probably leave it haha Going for another viewing on Saturday, but i think i found another nearly perfect place. It's semi detached, but its bigger and much much nicer

I need a bit help or advice as I'm about to purchase my 1st house.

I viewed a house today that ticked almost all boxes.

I quite like open style planning and this house has a living room and then a dining room separately. Dining room used to be a garage which was converted.

So I was thinking if I can knock that wall down or at least make an opening in it, to join 2 rooms together as that decision will make me buy it or make me look for another house.

I was wondering, if I post a floor plan, would anybody be able to tell me if it's a structual wall or can it be knocked down? Or does it need to be inspected on site?

I'm pretty sure (and owners said same) that opening (like an archway) can be made with a supporting concrete block/beam above it.

That's the second question...if it can't be knocked down, how big the opening can be?

Here's a floor plan of the ground floor. 2 floors in total (ground and 1st)

Lounge 15' 2" x 15' 3" (4.63m x 4.65m )

Dining Room 16' 0" x 8' 2" (4.89m x 2.48m )

Thanks in advance for any help and sorry if I'm being very stupid

Okay

 

Pops and bangs is on overrun.

 

Launch control is at full throttle.

 

Until today when I spoke to UpRev the UK DE cars have always had issues with ROM space that's why you can have 5 maps on a UK DE car and us tuners can't live map these cars. UpRev programmer told me today there is enough room in the ROM to get the launch control code in.

 

So you UK DE guys can have launch control. But I am think on cars with multi maps you can have a choice to have the launch on and off per chose able maps (via cruise control)

 

Hope that's makes it all a lot easier to understand

What if you don't have cruise control?

 

no launch I am afraid as the ACCEL/RES toggle is used to adjust the launch RPM

Damn it

Will have to settle for pops and bangs then.

Okay

 

Pops and bangs is on overrun.

 

Launch control is at full throttle.

 

Until today when I spoke to UpRev the UK DE cars have always had issues with ROM space that's why you can have 5 maps on a UK DE car and us tuners can't live map these cars. UpRev programmer told me today there is enough room in the ROM to get the launch control code in.

 

So you UK DE guys can have launch control. But I am think on cars with multi maps you can have a choice to have the launch on and off per chose able maps (via cruise control)

 

Hope that's makes it all a lot easier to understand

What if you don't have cruise control?

Can you get pops and bangs on supercharged zed? as thats the only thing i miss now haha

 

yep can add it to any car with a UK DE it cant be turned off , you have to tickle the throttle to make it pops and bang so not touching the throttle will stop the noise

I'm sold will be in touch soon for the "upgrade"