Jump to content

akewt

Members
  • Posts

    111
  • Joined

  • Last visited

Everything posted by akewt

  1. Sorry for late response! But thanks for the suggestions. Looks like it could be wales then. What is the Evo triangle??!
  2. Hello guys I want to do a little weekend away with the missus and wanted to get some suggestions on where the best roads are in terms of being picturesque, good to drive and quiet. I was thinking Wales perhaps, but where? Are there some famous roads out there? Cheers for any suggestions.
  3. blimey I get 60 miles on just over an 8th of a tank. That's over 400! Not sure that's entirely accurate but its way more than 200, def.
  4. I love my milltek and its enlgish made. makes a lovely sound and is not too noisy, lovely little gurgle too.
  5. Hi I had mine upgraded recently and the biting point is higher, it took me some getting used to but no problems with it. How high? Is it now uncomfortable to drive? I'm not sure it is even adjustable. Cheers
  6. akewt

    few questions

    I was going to say the same. parking sensors are after market so depends who fit them and what make. might be hard to find out but i'm sure there would be setting or resistor to change this. might be more hassle than it's worth to be honest.
  7. I'm pretty sure people are putting Gun metal grey when it should be twilight grey aren't they?
  8. Any body know of any in the N6 area or nearby? I need my head unit rewired so the phone connections come out of a different point in the car. cheers!
  9. akewt

    HU Rewire

    Hi Guys I had a Pioneer App Radio installed a little while back. Loving the unit and have it working with ARLiberator so have my android phone mirrored onto the HU screen. Full touch control with full phone functionality. We had agreed to run the wires through the middle console and out of the hatch/cubby at the back. I now don't want the mess of wires in there and want to route them out the back of the unit and trail them along the side of the middle console by the drivers left knee. I will just velcro tape the phone to the side there and plug it in at the back with the wire hanging loose. Now, I know how to get the HU out by taking off the main middle console but i don't know how to get the wires from out of the handbrake and cubby etc. Basically from the gear stick back. Are there any guides out there on how to get the covers off or can somebody guide me through the process please? Thanks for any help! Kev
  10. Hello guys Sorry for the extended delay in my response!! Been pretty darn busy. However. The Rawl Nuts I bought in the first linked workded a treat and I now have installed my boot divider (tonneau cover!? :/). Any questions about Rawl Nuts or installation please fire away Cheers ps, i do have two spare but i'm keepin em!
  11. i'll post how it goes. cheers
  12. yes they are just bought the ones from the link i posted in the first post. i actually bought 4 very cheaply but the postage was 7.95 :S anyway, got them now. The outer diameter of 12mm should be fine. Oh and Pro bolt don't have the m4 x 11mm
  13. Wouldn't have thought B&Q do rawl nuts like in the link I provided. Certainly don't on the web. Too specialist.
  14. Hi Guys I've read a couple of posts here of people that had got some a while back. Was wondering if anybody had a couple spare or knew where to get hold of them individually online? I found this http://www.orbitalfasteners.co.uk/en/products/rawplug-m4x12-rawlnut-flexi-plug-rawl-p-no-rnt-m4-12-screws-not-included but not sure if they second measurement matters too much? Cheers
  15. They're beautiful wheels indeed. shame they don't come in gun metal or anthracite etc i know about powder coating.
  16. akewt

    Will these fit?

    i'm liking these actually http://www.wheelbasealloys.com/19_Inch_OZ_Racing_Ultraleggera_HLT_Graphite_Alloy_Wheels__2803
  17. akewt

    Will these fit?

    interesting. i was looking at the Rotas but they don't come in grey. how much would powder coating cost and does it look any good?
  18. akewt

    Will these fit?

    shame, i thought there may be a way to fit them i didn't know about. struggling to find a 19" multi spoke wheel in gun metal grey or anthracite. cheers
  19. akewt

    Will these fit?

    Hi Guys Don't much about wheels so can anybody tell me if these would fit a Zed? http://www.wheelbasealloys.com/19_Inch_TSW_Nurburgring_GM_Alloy_Wheels__6269 nice
  20. akewt

    MILTEK vs INVIDIA

    Thanks for the response Mark. Looking forward to booking it in and getting one fitted. Most likely I will be going for the Milltek system. When the numbers in my account look like they are behaving nicely i will be in contact.
  21. akewt

    MILTEK vs INVIDIA

    Nice! I agree, both will be a good buy. Cheers for posting the vid dude Hey glrnet. That would be awesome. Maybe one weekend day over the next few weekends I'll pop over. I'll give you a shout via pm. I'm with cheapo elephant. I hadn't driven for about 2 years and lost 12 years NCB with tesco so went with a cheapo firm again.
  22. akewt

    MILTEK vs INVIDIA

    Cheers guys. Plenty of food for thought there. Abbey say they fit the Miltek for 350z's as a standard. Sure they will fit whatever but they have experience with it. Couple of other questions. Will adding an intake help the exhaust at all? I heard it would do. Also, how much will it affect my insurance?
  23. akewt

    MILTEK vs INVIDIA

    I would like it slightly louder than the oem. A bit more agresive and low. Not sure what style really. I won't be doing many performance upgrades really apart from perhaps an intake and a remap. Prob rollbars but that's inconsequential. Cheers
  24. Hi Can somebody tell me the main characteristics of these exhausts and if one is better than the other? Abbey have told me I need to replace my existing OEM exhaust so think its a good opportunity to upgrade. Can't wait to here a new one in there. Any info much appreciated. Kev
×
×
  • Create New...