cmck13

No worries mate stick a few photos up before and after, a picture tells a thousand words etc etc. If you push the button in and out when the door is open you'll see the window return to its shut position.

FK 1000P designed specifically for high heat areas over 250C + used it for over 6 years never been let down.

In this part of the world it can be called door shut, same thing though

They are a well known brand you'll see them on ebay, I agree, go for steel versions. Locking nuts is up to you, I know some do, some dont. All I would say is that you can buy nut splitters any where these days so if they want your wheels they can get them off.

I use this company but I think you'll find automotive masking tapes at halfords etc. http://www.cleanyour...ries/cat_6.html

I assume you have read this thread from Chris, covers the fitting of a vortech V3 but it was not trying to break any world records in the fitting time. I was too lazy to fit mine so mine was done at Abbey.

http://www.350z-uk.c...a-supercharger/

A warm

God bless you Jules, RIP.

Try Glipstone, http://www.liquidleather.com/

Hard wire the connectors under the seats if nothing else works, usually but not always, the connections are a bit flakey.

A warm welcome

Pm sent

A warm welcome.

These are registered on here, http://www.mtecbrakes.com/

have put them on 350z- fb page

You should try photobucket etc its designed not to have any problems with size.Under share links, IMG then copy onto here.

See what you mean, straight line speed, disappearing into the mist. Not so good on the bends you should have had a bet on that one.

Same as Zeus, a dremel will get into the nooks and crannies if you have one. make sure you do go for satin black.

Not a MOT failure some drive around without it these days, personally I like the ultra racing one direct bolt on to the original positions.

This guy sells all types of 350/370z badges on this site, look good.

http://www.350z-uk.com/topic/81815-satin-silver-350z-z-emblems/

A warm welcome

A warm welcome Samantha, plus one, on aquagraphix not the cheapest but certainly the best.

Nothing at all under my seats. Just started flashing for no reason. Oh well call it a querk on the car. Lol cheers guys for the link.

 

Same issue with me. Absolutely nothing changed (I hadnt even adjusted the seats) and underneath both were clear. I simple got the car out of the garage and it started blinking, when i put it in the garage it was fine.

 

The youtube video worked for me and it hasnt come back on now almost a week later.

I'm assuming you don't literally mean nothing under the seat you have the following? This shows the hard wiring I mentioned.

http://www.350z-uk.com/topic/72592-passenger-under-seat-airbag-connections/

I like many had this problem when I first bought my car, like most there was no reason for it. After a couple of attempts and getting no further I took it to my independent Nissan guy that learnt his trade through the company. His reply was that the connection block below the seats needed to be hard wired it is a very common problem with the Z. Never had a problem in the past 4 years with the light.

Found one thanks to Rich 370z, thread can be locked now.

Saw him at his home with my Z so I showed him his ten grands worth of car that he owns by proxy. Great guy, always a pleasure to let him steal money from me.