Goldcrest Four

I am delighted to say that this problem has now been resolved (bin the Bury unit). My apologies go to ianp for hijacking his thread. I offer my thanks to Wasso and Ruddles for their offers of help but very special thanks to M13KYF for the advice and PIMM for his excellent help, advice and resolution. posting.php?mode=reply&f=10&t=31236# posting.php?mode=reply&f=10&t=31236# This forum is superb. (I'm sick of hearing the word 'pardon' though) posting.php?mode=reply&f=10&t=31236#

Wasso, you're a star, thanks. PM sent

Thanks M13KYF, you guys seem to reply at the spead of light!! I am impressed. Yes, I was aware of that thread, unfortunately it doesn't resolve my problem though: I have what you guys refer to as the cradle (shoe?) into which slides the module photographed. I have an assembly very similar to that shown here: www.google.co.uk/products/catalog?num=2 ... EEQ8wIwAw# (sorry about that string). The assembly fits the shoe OK and has a phone cradle on the upper surface but I cant pair with my Nokia. I have also downloaded the user manual for the THB Bury assembly and this infers that they may be handset specific, but that isn't clear/certain. Judging by this thread ianp had a similar issue. I am happy to buy the module photographed if it is 'general purpose', but wanted to be sure that it was my module that was incompatable and not a fault on my car. I guess the only sure way to find a local zed owner and see if I can borrow their module for a few minutes.

Hi Guys, i have just picked up on this thread; recently acquired a 06 GT with a Take and Talk Bury adapter with what looks like a phone specific cradle on it - it won't pair with my Nokia. Was the original query ever resolved? Will I wasting my money if ordered a 'regular' adapter (ie one without a phone cradle)?

Sorry to hear that Kev. I had the same problem and a forced software update cured it for me (pleased you worked out that the button i described as 'reset' was in fact 'labeled 'back up' though). Not all programmes have 'series link' and not all have a 'synopsis'. Try contacting Satcure or look at their forum; they are excellent at this stuff. Good luck (and thanks for the welcome to the forum).

Sorry. Should have posted ' whilst holding reset button down'.

Force a software update/download, it will have no affect on prior recordings so you lose nothing. Put digibox to 'standby'. unplug at supply and wait 30secs. Whilst holding button down (rearmost button on top of box) plug in supply again. Keep button held down until 4 leds luminate on front of digibox, then you can release button. Wait for software to download - this will take a few minutes and leds will extinquish when complete. Wait a further 30secs. Switch up as normal.