jub

Hi all, Hope all's well. I'm planning to do an EU road trip for 3 weeks in September. Has anyone got any recommended routes/tips? Cheers, Jub

BB52 LOW (BBS 2 LOW) - started at no reserve http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 500wt_1156

Hi guys, I've tried searching this on the forum but had no luck, just wanted to know which engine oils people are using? Recommended ones? I haven't got any major engine mods, just a short ram intake. Cheers

Has anyone here either resprayed or wrapped their door handles at all? If not, has anybody taken their door handles apart?

It's been a while since I've put a pic up so I thought now's a great time. Got the wheels powder coated up at BJV engineering up in Hemel Hempstead (http://www.wheelrefurbishing.co.uk/). Took 3 days and it's a really good finish - I went for matte/satin black on the stock Rays. However, coincidentally, on the same day I collected the car, due to a severely iced up car park, I managed to kerb one of the rims Pictures below shall explain all

You mind reader

Hi all, I've recently got myself a 550d with the standard 18-55mm lens. Does anyone recommend any particular lens for outdoor use? Thanks

Hi all, I was wondering if anybody has resprayed their Rays either matte or gloss black and has any pictures? I'm getting mine resprayed in 2 weeks time, just deciding between the two. Thanks

Shocking news. My thoughts are with both families

Ah gotcha, nice one. I'd be going for matte black with a red lip. How long did it take them?

Does anyone know of any places around London (North London preferably, so Herts etc) that do a good job at powder coating? If not, wet painting? I've got stock Rays. And this wheel cracking issue, I'm assuming if they're coated at the right temperature then it shouldn't be a problem?

Does anyone know of any places around London (North London preferably, so Herts etc) that do a good job at powder coating? If not, wet painting? I've got stock Rays. And this wheel cracking issue, I'm assuming if they're coated at the right temperature then it shouldn't be a problem?

Justo to clarify, if I order a 6" x 12" plate, it should fit fine on the motorised bracket? Bhavin85 measured the bracket as being 6.5" x 12.5"...

Any tips on doing it without removing the bumper? Cheers

A delayed response on my part, but I'm getting the bumper done next week. Have you still got the square plate holder? Would a 12" by 6" be right?

Hi all, Just renewing last year's league. Register here: http://fantasy.premierleague.com Code to join this league: 438357-121478 for 2011 Cheers

Just joined. Let the banter begin...

Anybody up for it?

Cheers man, nice one

I've decided to go for the Bosch for now, and then in Autumn (when more rain is expected, then again you never know with this country) I'll upgrade to the PIAA. I'm looking around on eBay and seeing some listings tagged with ' 20" ', all the blade lengths should be the same right?

I can safely say, these are now sold

Hi guys, My front wipers need changing due to corrosion (the whole set) and the rear blade needs changing. Thought I'd use the opportunity to look at other options possibly. I've heard that the PIAA ones are pretty good, anyone got them?

Apologies for the lack of update. These have been pretty much sold to Chris. Will mark as sold once transaction in complete

One more pic...

Hi guys, I bought these springs off Bhav (bhavin85) back in November but haven't had a chance to put them on. I don't see myself putting them on for a while, hence deciding to sell them. They're as Bhav sold them to me, brand new and unused. Eibach Pro-Kit Nissan 350z (Z33) E10-63-013-01-22 30mm drop all around I'll put them up at £180, but willing to listen to any offers. Ideally collection from Uxbridge (Outer West London, near Heathrow). Can arrange alternative meeting points if needed. Feel free to ask any questions. Jub