mrkieran23 Posted May 20, 2015 Posted May 20, 2015 So as the above says, put some led festoon bulbs in and I heard a pop and the light went, while searching for the fuse box I caught the indicator which also didn't work.... I got worried. Found the fuse box and there was 10amp fuse gone, replaced it with a spare and indicators now work but the dome lights only work when pressed, not auto when the door opens. Anybody ideas? Quote
Keyser Posted May 20, 2015 Posted May 20, 2015 I'd check the door switch little black rubber thing in the door shut, may have sparked when the fuse blew and now not making a good connection - just an idea Quote
Neilp Posted May 20, 2015 Posted May 20, 2015 Was it the metal bodied led that you used? If so it could be the BCM thats has gone. Quote
mrkieran23 Posted May 20, 2015 Author Posted May 20, 2015 (edited) I hope not. replaced bulb, work ok Edited August 10, 2015 by mrkieran23 Quote
mrkieran23 Posted May 20, 2015 Author Posted May 20, 2015 (edited) Had some more look and found festoon bulb with heat shield on the back advised Everything seems to be in order though so Edited August 10, 2015 by mrkieran23 Quote
KyleR Posted May 22, 2015 Posted May 22, 2015 Oops! Personally if it were me, I'd just leave it so long as everything else is working. But, I was under the impression that if it as the BCM it would be a bigger issue than the dome lights not operating with the door. Hopefully something simpler. Quote
mrkieran23 Posted May 22, 2015 Author Posted May 22, 2015 (edited) Well everything else seems to be working Edited August 10, 2015 by mrkieran23 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.