goodatcrashing 11 Posted December 7, 2014 (edited) Hello all, a few parts going below. Based in Manchester. Eibach wheel spacers - 2 X 20mm, 2 X 25mm. Good condition, some degreaser will have them gleaming, supplied with 20 nuts as 5 have rounded, all studs are in good condition - no cross threading. They are £1 per nut on ebay. SOLD. Tein lowering springs. Less than 2000 miles use, excellent condition, comes with original box SOLD Berk technology decats. DE fitment, 2.5" bore, integrated O2 sensor spacer, T304 grade stainless steel, mandrel bent and Tig welded. A good polish will make them shiney again. £100 + postage JIC Y pipe. One of the joints is blowing slightly. Replacement joint can be had for £25. Good condition otherwise. £90 + postage Edited March 6, 2016 by goodatcrashing Quote Share this post Link to post Share on other sites
r111nxx 29 Posted December 7, 2014 Pm'd mate. Quote Share this post Link to post Share on other sites
goodatcrashing 11 Posted December 8, 2014 All PM's replied to. Quote Share this post Link to post Share on other sites
Floydbax 190 Posted December 8, 2014 Will those Tein's fit a Roadster? Please Quote Share this post Link to post Share on other sites
grahamc 577 Posted December 9, 2014 are the spacers required with these wheels? Quote Share this post Link to post Share on other sites
Zcat7 3 Posted December 9, 2014 I'm interested in the wheels if they are still available? Any idea on postage costs to Essex? Quote Share this post Link to post Share on other sites
goodatcrashing 11 Posted December 9, 2014 Im pretty sure the dampers are the same part number on coupe and roadster, so assume they would fit. Might be worth asking around to be 100%? Spacers are not needed for the wheels. They fit direct onto the standard hubs. If you want to push them a little wider, the spacers can achieve this. I'd prefer the wheels to be either picked up or arranged via courier of your choice. That way you could find the best deal as there will be a considerable range. Quote Share this post Link to post Share on other sites
Mike1989 20 Posted December 9, 2014 Pm'd mate Quote Share this post Link to post Share on other sites
Zcat7 3 Posted December 9, 2014 OK, PM'd about the wheels! Quote Share this post Link to post Share on other sites
Floydbax 190 Posted December 9, 2014 The springs for the Coupe are different rates for the rear than the Roadster, do you have a part number on the box that I can check please - Ta - RB Quote Share this post Link to post Share on other sites
goodatcrashing 11 Posted December 11, 2014 All PM's replied to. If you haven't had a reply from me by now, send another message, got quite a few to answer and apologise if i've missed you out. @ Floydbax - Part number is SKP24-AVB00. I had no idea the spring rates were different. 1 Quote Share this post Link to post Share on other sites
Floydbax 190 Posted December 11, 2014 Nissan 350Z 3.5 Z33 RWD 2002 To 2008, Excluding Cabrio, Lowers Front by -17mm, Lowers Rear by -14mm. Spring Rate Front 6.9 (kgf/mm), Spring Rate Rear 7.2 (kgf/mm). Sadly these are Coupe only Quote Share this post Link to post Share on other sites
goodatcrashing 11 Posted December 11, 2014 Learn something about Z's every day. Time to get a coupe maybe ? Quote Share this post Link to post Share on other sites
Rock_Steady 805 Posted December 11, 2014 pm'd Quote Share this post Link to post Share on other sites
goodatcrashing 11 Posted March 8, 2015 Parts listed are still for sale. Quote Share this post Link to post Share on other sites