Alessio Posted March 6, 2014 Posted March 6, 2014 (edited) I FIXED IT, YOU CAN CLOSE THE TOPIC. Hi Friends, From yesterday i have a little problem on my zed. When in start up i notice that the needle goes (example 2.000 rpm) and stay there until i hit an higher rpm, example 3000. then it stuck on 3000, and so on... then some times the needle try to follow the engine rpm but with big jumps, not smoothly as the engine goes. The problem disappear after 10 minutes of drive, and reappers when i start up again the Z after few hours. 1 - the engine runs as always, 2 - all the other gauges and tacho too. Thanks, Alessio Edited March 6, 2014 by Alessio Quote
Scott TMN Posted March 6, 2014 Posted March 6, 2014 How did you fix it? Could be useful for other members in the future? Quote
GIXXERUK Posted March 6, 2014 Posted March 6, 2014 How did you fix it? Could be useful for other members in the future? +1. Nowhere near enough people conclude a thread properly, would be a great help to others Quote
Darren350 Posted March 6, 2014 Posted March 6, 2014 "I fixed it. **** you lot!" Haha Sent from my GT-I9300 using Tapatalk Quote
GMballistic Posted March 6, 2014 Posted March 6, 2014 "I fixed it. **** you lot!" Haha Sent from my GT-I9300 using Tapatalk Probably fixed it by ye old method of smacking a closed fist on top of the rev counter. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.