number plate fixing kit

[KUGT4]

need to replace my rusting set with nice new ones - anybody know what size/spec is required?

[WhackyWill]

Some double sided pads from HalfFrauds will do.

[The Bounty Bar Kid]

Some double sided pads from HalfFrauds will do.

 

Id avoid that stuff. Truly pathetic! Get some wing mirror tape.

[WhackyWill]

Some double sided pads from HalfFrauds will do.

 

Id avoid that stuff. Truly pathetic! Get some wing mirror tape.

 

Its all made by 3M, HalfFrauds 3M numberplate pads are fine.. :thumbs:

[14N]

I'm assuming if the OP's set are rusting, he/she means number plate screws

 

Get them off eBay dude.

 

The 3M pads are good (and neater), but you'll need a new set of plates too (unless you don't mind the screw holes).

[mrchic]

http://www.ebay.co.u...cat=0&_from=R40

 

Selection here,

 

Depending on the hole size you may need to find bigger or smaller screws

Edited November 11, 2013 by mrchic

[KUGT4]

loving these....

 

http://www.ebay.co.uk/itm/Anti-theft-Number-Plate-Fixing-Screws-with-fitting-kit-and-Free-1st-class-Post-/321052117856?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ac0328b60

[WhackyWill]

I'm assuming if the OP's set are rusting, he/she means number plate screws

 

Get them off eBay dude.

 

The 3M pads are good (and neater), but you'll need a new set of plates too (unless you don't mind the screw holes).

 

Use the pads and get the screw head dome caps (yellow for rear and white for front) and glue them over the

 

holes in the plate if you want to use the original plates...neat job... :thumbs: