2x Tonneau Cover Rawl Nuts

[akewt]

Hi Guys

 

I've read a couple of posts here of people that had got some a while back. Was wondering if anybody had a couple spare or knew where to get hold of them individually online?

 

I found this http://www.orbitalfasteners.co.uk/en/products/rawplug-m4x12-rawlnut-flexi-plug-rawl-p-no-rnt-m4-12-screws-not-included but not sure if they second measurement matters too much?

 

Cheers

[BulletMagnet]

Try B&Q, they'll probably have loads for cheap

[akewt]

Try B&Q, they'll probably have loads for cheap

Wouldn't have thought B&Q do rawl nuts like in the link I provided. Certainly don't on the web. Too specialist.

[rob63]

I think you require M6 Well Nuts, or are they indeed M4? Pro-Bolt will have them

[kbeast35]

are these for under the strut brace that the screws for the upper brackets screw into?

if so i could do with a couple too

[akewt]

are these for under the strut brace that the screws for the upper brackets screw into?

if so i could do with a couple too

yes they are

just bought the ones from the link i posted in the first post. i actually bought 4 very cheaply but the postage was 7.95 :S

anyway, got them now.

The outer diameter of 12mm should be fine.

Oh and Pro bolt don't have the m4 x 11mm

Edited July 21, 2013 by akewt

[kbeast35]

please let me know if they're up to the job

[SteveW]

I hope these work for you.

 

Any nut and bolt specialist should sell these.

 

I bought some but ended up having to get the longer 20mm ones as the 12mm's didn't grip.

[akewt]

i'll post how it goes. cheers

[Guest]

I could do with some help on this to please, my recently purchased tonneau flying around all over the place. For fixing to the upper strut base, correct me if wrong, I have removed the top cover of the thingies underneath, those that look like cargo net clips? I have been given 2 short m6 nuts, with bolts. They do not secure the tonneau, should they be 20mm long then, and what are the bolts for then? Secondly then, what is missing for fixing to the floor pan? Thanks.

[akewt]

Hello guys

Sorry for the extended delay in my response!! Been pretty darn busy.

 

However. The Rawl Nuts I bought in the first linked workded a treat and I now have installed my boot divider (tonneau cover!? :/).

 

Any questions about Rawl Nuts or installation please fire away

 

Cheers

 

ps, i do have two spare but i'm keepin em!

Edited September 24, 2013 by akewt