Jump to content

Scott's Project Zed


Scott TMN

Recommended Posts

  • 5 weeks later...

Belated updated, roof wrap and attempted window tint.

Roof went very well, happy bunny about that :) used Hexis Gloss black. Also wanted to get the window tinted to carry the black over, ideally I wanted 20% but had some 5% laying around so thought i would give it a bash. Wasnt as success filled as the wrap but will do for now untill I get it redone :) anyway some pictures:

 

Also added a little Nismo sticker I made up...

2BC69D31-782B-4D07-8188-5512ACB89332-27267-000007AB3234AA40_zps35702435.jpg

 

8A5AC6F9-8965-45BF-BFF7-D6D49DFBE1D7-27267-000007AB38039481_zps26af7b44.jpg

 

D04281BC-2ED8-4ACF-B5AF-F85396529CA9-27267-000007AB28B7C019_zps2dbfa94f.jpg

Edited by Scott_f91
Link to comment
Share on other sites

Cheers mate. Not sure of the brand but it was some pre cut stuff I bought quite a while back off eBay. Think I paid about £30 for all 3 rear windows. Tbh I don't think it was the best quality of stuff, but I'm no tint expert. But it's so much harder and less forgiving than wrap I found.

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Slight change of plan. Wet about test fitting the wheels and all seemed to stick out a mile, fronts, with stretch I could just get away with however backs seemed to be a mile out the arches, which I can't understand as I was trying to replicate the stance of a few people on here. But cougar store sorted me out (thanks again for an amazing service)

Anyways I'll show you show fitted pics. 10j rear et15 and 9.5j et20

 

Front

With a 245 tyre on. As I say I could just get away with this although the backs were my main concern..

A80276D9-794E-4268-863E-B26EA978575F-921-000000F2664400AF_zps59759fd1.jpg

 

I did fit the rears with a tyre and say it down but unfortuably didn't get a picture, but still a standard jacked up test fit:

F4941FE1-B6BC-421F-864B-E340950C91BF-921-000000F25277F033_zps59d2ad15.jpg

 

And here is one with the front (9.5j) on the back. This is more what I was looking for with regards to how it sits in the arch.

FD50DE76-75AD-4706-85BD-B98CADE9C6B2-921-000000F258CFF440_zps18bec305.jpg

 

I shall revisit the wheel situation in the new year. Untill then, some brakes! Black diamond discs front and back (6 groove) and black diamond pads to match :) should be on Saturday :)

4E4EA8F9-4A75-4240-830F-390B015CB03B-1455-00000151E5B95CE4_zps0adc0963.jpg

 

Also will be test fitting my v1 replica skirts next weekend (thanks to some advice from

Rodgeevans :) )

 

Also have an exhaust on the way, hoping it's something a bit different :p

Edited by Scott_f91
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...