ewan221 Posted September 9, 2012 Posted September 9, 2012 When I bought the car it had really horrible after market badges, have a nice new liquidart one to go on back but having real trouble removing the sticky goo left from the double sided tape. Have tried heating up with hair dryer, tar remover and rubbing with polish and not making much difference Any ideas ?????? Quote
SteveRS Posted September 9, 2012 Posted September 9, 2012 Try some white spirit on a microfibre Quote
TomS Posted September 9, 2012 Posted September 9, 2012 GooGone from Amazon does the trick. I spent ages faffing with a hairdryer and all sorts before this stuff did it in 5 minutes! Quote
brillomaster Posted September 9, 2012 Posted September 9, 2012 i always find a bit of degreaser like some WD-40 does the trick? Quote
veilside z Posted September 9, 2012 Posted September 9, 2012 i always use white spirit and a lint free cloth. Quote
doctor austin Posted September 9, 2012 Posted September 9, 2012 No No you need ethanol or TSd3 (meths) trust me Im a doctor. Quote
ddcboyle Posted September 9, 2012 Posted September 9, 2012 I just used Lighter fluid and a microfibre cloth for a bit of soft but bumpyness, came off fine. 10min job [edit] Also used finger when it was wet with fluid and just rubbed in circles to take off the thickness of the sticky stuff Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.