ace Posted August 21, 2011 Posted August 21, 2011 I have had my car a year now and this week for some reason I have water on the inside in the n/s Bi-zenon head light I have used the head light washers a few times this week would it be possible that water from this to get inside as I thought the lights were sealed can I get inside the lens to wipe it then seal it somehow? Quote
EH 370z Posted August 21, 2011 Posted August 21, 2011 I am not a massive expert on this subject by any means however, as I understand it the unit is pretty much sealed. First thing is, I suppose, is identifying where the water is getting in. A common cause is useing pressure washers this can get in. Next has the seal where the bulbs goes in, been compromised in anyway? In the short term I would sugest that you remove the whole head light, remove the bulbs drain out as much standing water as you can, and get a hair dryer on the job! Whislt its out you can fully inspect the unit. Good luck Quote
Beau Posted August 21, 2011 Posted August 21, 2011 How much water, is there a puddle in the light, if so then it would be a good idea to get the water out asap before damaging the unit. Some pics maybe? Quote
Lexx Posted August 21, 2011 Posted August 21, 2011 The Zed's units are notorious for not being the best sealed. They are severely prone to condensation building up. HHow much water are we talking here? Puddles? Quote
Tricky-Ricky Posted August 23, 2011 Posted August 23, 2011 The trouble with getting water into the headlight, is that because of the position of the HID ballast, it quite often results in water killing the unit, believe me it happened to my 350GT, same ballast position. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.